P1000 shoulder harness mounting bolt

[kyorphan]

Looking to use the shoulder strap mounting point on back of cage for light mount. Can anyone tell me the proper thread size for this? Have tried 10mm but to loose. Thanks

 

[Admin]

 

[GlockMeister]

Looking to use the shoulder strap mounting point on back of cage for light mount. Can anyone tell me the proper thread size for this? Have tried 10mm but to loose. Thanks

Try a 7/16 -20 thread pitch. That's what the lap belt bolts are.

 

[ohanacreek]

Take the bolt out and take it to an auto parts store they usually have a tool near the fasteners that you can try the bolt in different holes with different threads, to find the right one.

 

[kyorphan]

Try a 7/16 -20 thread pitch. That's what the lap belt bolts are.

It is not a 7/16, have tried 10mm and 7/16. 10mm too loose and 7/16 too big. went to a local honda dealer and they couldn't tell me what size it is, does not show up on parts diagram.

 

[GlockMeister]

It is not a 7/16, have tried 10mm and 7/16. 10mm too loose and 7/16 too big. went to a local honda dealer and they couldn't tell me what size it is, does not show up on parts diagram.

I dunno then bud. If you have a tap and die set you could try different size taps to see which one fits. Without having a bolt in it I don't know what else to recommend other than that

 

[kyorphan]

It is not a 7/16, have tried 10mm and 7/16. 10mm too loose and 7/16 too big. went to a local honda dealer and they couldn't tell me what size it is, does not show up on parts diagram.

Thanks for the help anyway.

 

[GlockMeister]

Thanks for the help anyway.

Give me a min I'll go see if I can figure it out

 

[GlockMeister]

It is not a 7/16, have tried 10mm and 7/16. 10mm too loose and 7/16 too big. went to a local honda dealer and they couldn't tell me what size it is, does not show up on parts diagram.

Ok I just went and checked it is a 7/16-20. You'll more than likely have to chase the threads...mine had mud,rust,and powder coat in there.

 

[JTW]

Thanks for this! My 4 points just came in!

 

[nbomar]

Thanks for this! My 4 points just came in!

Mine too! Ordered the beards like @Tramguage1 had at mulberry.


Sent from my iPhone using Tapatalk

 

[JTW]

Mine too! Ordered the beards like @Tramguage1 had at mulberry.


Sent from my iPhone using Tapatalk

I went cheap.. I liked the buckels on these.
Amazon.com: Tanaka 4-point Buckle Sports Harness Seat Belt One Set NEW Type … (Black): Automotive

 

[GlockMeister]

These are the ones I used. Me and the wife like them. I scotchguarded the pads so they didn't absorb a bunch of water.

https://www.amazon.com/gp/aw/d/B01FN65NQQ/?tag=sxsweb24-20

 

[nbomar]

These are the ones I used. Me and the wife like them. I scotchguarded the pads so they didn't absorb a bunch of water.

Amazon.com: 4 Point Padded Harness with 2 Inch Pads E4 Certified: Automotive

Did you just use the factory lower belt positions?


Sent from my iPhone using Tapatalk

 

[GlockMeister]

Did you just use the factory lower belt positions?


Sent from my iPhone using Tapatalk

Yessir I did.

 

[nbomar]

Yessir I did.

So basically a 15 minutes install?


Sent from my iPhone using Tapatalk

 

[GlockMeister]

So basically a 15 minutes install?


Sent from my iPhone using Tapatalk

Yeah the only thing I ran into was I had to drill the mounting tab for the lap belt out a little bigger so I could use the factory shoulder bolts. And drill one hole in the passenger head rest.

 

[JTW]

Yeah the only thing I ran into was I had to drill the mounting tab for the lap belt out a little bigger so I could use the factory shoulder bolts. And drill one hole in the passenger head rest.

??? Drill a hole in the head rest?

 

[GlockMeister]

??? Drill a hole in the head rest?

Yep..like this.

 

[JTW]

Yep..like this.
View attachment 49494

Got ya!