Talon Seat Belt Bypass?

[TalonR19]

Has anyone bought or done a seat belt bypass? I want to change the stock seat belt to a 4 point harness.

 

[Admin]

 

[JTW]

What’s the problem then? Unbolt the belts and put the harnesses in.

 

[TalonR19]

What’s the problem then? Unbolt the belts and put the harnesses in.

You can only drive 15mph if the drivers seat belt isn't buckled in.

 

[HondaTech]

We haven't actually plugged 1 in yet, but Dragonfire has a 2 pin jumper to bypass it.

Its usually listed as being for the YXZ.

 

[JTW]

You can only drive 15mph if the drivers seat belt isn't buckled in.

Ok.. you just use a jumper to bypass it.

 

[JTW]

@Neohio

 

[Hondasxs]

This works. But requires you to have harnesses installed.
Harness accessory seatbelt bypass kit

Sent from my SM-G955U using Tapatalk

 

[Neohio]

We haven't actually plugged 1 in yet, but Dragonfire has a 2 pin jumper to bypass it.

Its usually listed as being for the YXZ.

I tried to google this to confirm. If you come across a picture let me know.

I know the one of the forum store is correct for pioneers.

 

[HondaTech]

I tried to google this to confirm. If you come across a picture let me know.

I know the one of the forum store is correct for pioneers.

Our parts manaher order both of the ones dragonfire offers. The larger blue/black one is for RZRs and Can-Am the sampler white one says it fits Yamaha, but should fit the Pioneer lineup and in turn the Talon.

 

[Neohio]

Our parts manaher order both of the ones dragonfire offers. The larger blue/black one is for RZRs and Can-Am the sampler white one says it fits Yamaha, but should fit the Pioneer lineup and in turn the Talon.

I found that one. It will not work on pioneers. The bypass needed for pioneer is a female receptacle.
You will probably need this for Talons.

You can make it yourself or get the one from the forum store.
Harness accessory seatbelt bypass kit

 

[HondaTech]

I found that one. It will not work on pioneers. The bypass needed for pioneer is a female receptacle.
You will probably need this for Talons.
View attachment 117252
You can make it yourself or get the one from the forum store.
Harness accessory seatbelt bypass kit

The Dragonfire part I was referring to is the male end that plugs into the plug you have pictured.

I looked back at a previous post about the 500 seat belt interlock bypass. It looks like that 1 is the female plug like the Dragonfire part. Ill look and see if I can find out for sure tomorrow.

 

[JTW]

The Dragonfire part I was referring to is the male end that plugs into the plug you have pictured.

I looked back at a previous post about the 500 seat belt interlock bypass. It looks like that 1 is the female plug like the Dragonfire part. Ill look and see if I can find out for sure tomorrow.

View attachment 117276

Yeah.. the plug isn’t overly necessary just cleaner.

 

[Neohio]

This is the plug I found for the yxz.

The Honda stuff needs the mate for that. The one I pictured.

 

[HondaTech]

This is the plug I found for the yxz.
View attachment 117396
The Honda stuff needs the mate for that. The one I pictured.

In the 500 picture I found it would appear the seatbelt side of the circuit is the smaller plug. Is the P1K different?

 

[Neohio]

I believe the Honda chassis harness uses this plug into the seatbelt.

I can only speak for the 18LE I was working on. I would believe other Pioneers are similar.
I used the mating connector for the above picture to build a bypass.
That is what is pictured above.
I would think you are better on a parts fiche then I am. But we could compare driver buckles across the lines to verify part numbers?

Edit: All seat belts are model specific. That won't help.