P1000 Roof mounts for led pods?

[Alaska350]

Has a anyone seen some kind of led pod mounts for the roof? I want run the high beam harness from the memeber store so I’m limited to the amount of power the lights can use. I can’t use the bottom of the window frame mounts because there is a big rubber boot there that is part of the hard door kit.

 

[Admin]

 

[Smitty335]

Has a anyone seen some kind of led pod mounts for the roof? I want run the high beam harness from the memeber store so I’m limited to the amount of power the lights can use. I can’t use the bottom of the window frame mounts because there is a big rubber boot there that is part of the hard door kit.View attachment 323115

In my area, roof mounted anything is a no, no!

 

[Remington]

Has a anyone seen some kind of led pod mounts for the roof? I want run the high beam harness from the memeber store so I’m limited to the amount of power the lights can use. I can’t use the bottom of the window frame mounts because there is a big rubber boot there that is part of the hard door kit.View attachment 323115

This black bolt right there. Can u get a more straight on pic instead of an angle Please? I may have a solution for you.

 

[Remington]

Anyway, this is an old pick from long long ago in a Galaxy far far away lol of my rig. If you have access to those bolts, you can mount pods on those buy using a longer bolt. There are tons of pod manufactures that make pods in different sizes that will fit that area.

 

[Alaska350]

In my area, roof mounted anything is a no, no!

why is that? trees?

 

[Alaska350]

Anyway, this is an old pick from long long ago in a Galaxy far far away lol of my rig. If you have access to those bolts, you can mount pods on those buy using a longer bolt. There are tons of pod manufactures that make pods in different sizes that will fit that area.
View attachment 323128

Thanks for the idea sir, i will have to investigate this option.

 

[Hondasxs]

Or consider using the high beam trigger to control a relay for a much bigger light.

DIY High Beam Trigger Wire Harness for Pioneer 1000 - All years

Plug-N-Play wire harness for easy installation. Hookup a Small to Medium LED light bar with ease 2ft lead allows easy wiring to the accessory. An easy fix for the dim factor headlights by installing an extra high beam light bar. Plug-n-play install. No modification to the stock wires at all...

store.hondasxs.com

Sent from my SM-G996U using Tapatalk

 

[Alaska350]

Or consider using the high beam trigger to control a relay for a much bigger light.

DIY High Beam Trigger Wire Harness for Pioneer 1000 - All years

Plug-N-Play wire harness for easy installation. Hookup a Small to Medium LED light bar with ease 2ft lead allows easy wiring to the accessory. An easy fix for the dim factor headlights by installing an extra high beam light bar. Plug-n-play install. No modification to the stock wires at all...

store.hondasxs.com

Sent from my SM-G996U using Tapatalk

I bought this kit already which is why I am limited on the power consumption (72 watts). Bigger lights use too much power and I don’t have the bumper stinger or room on my bumper for the light bar recommended in the member store.

 

[Remington]

I bought this kit already which is why I am limited on the power consumption (72 watts). Bigger lights use too much power and I don’t have the bumper stinger or room on my bumper for the light bar recommended in the member store.View attachment 323178

You have the same bumper as I used to in the pic I posted. you have room to put some small cubes on the bars and a small light bar i the middle Just as shown in the pic.
those are cheep amazon LED’s that u can use. They worked great for me. there are better low profile less amp LED cubes now that u can in instead. Try Rough Country or Lifetime LED. there more money but worth it in the long run

 

[Smitty335]

why is that? trees?

Yep!

 

[Alaska350]

You have the same bumper as I used to in the pic I posted. you have room to put some small cubes on the bars and a small light bar i the middle Just as shown in the pic.
those are cheep amazon LED’s that u can use. They worked great for me. there are better low profile less amp LED cubes now that u can in instead. Try Rough Country or Lifetime LED. there more money but worth it in the long run

No sir, a middle led bar will not fit due to the front hitch plate i installed as shown in the pic. I bought the rough country black series led cube pods but need to get a bracket to install them on the bumper arms like you or install on the hood. prob will do the hood as I don't want them constantly being submerged in water when i cross creeks.

 

[Remington]

No sir, a middle led bar will not fit due to the front hitch plate i installed as shown in the pic. I bought the rough country black series led cube pods but need to get a bracket to install them on the bumper arms like you or install on the hood. prob will do the hood as I don't want them constantly being submerged in water when i cross creeks.

I don’t have a pic of it currently but if you invert your brackets on your bumper you can use that small white bar in the middle and it won’t interfere with your hitch plate. again, look at lifetime LED. They’re smaller put out a butt ton of light guaranteed for life and I’ve had mine submerged Many many times without issue. The pic I do have of this light is on my LE bumper in the middle

 

[Hillbillytnt]

I bought this kit already which is why I am limited on the power consumption (72 watts). Bigger lights use too much power and I don’t have the bumper stinger or room on my bumper for the light bar recommended in the member store.View attachment 323178

That plug can be used with a relay to trigger whatever you want. It’s pretty versatile I have it run through an on off on switch and relay to power a 12” quad row on my bumper. I can run it with the high beams triggering it or just run it by itself.

 

[Remington]

I’m gonna dump the light bar by the way. It’s a pain in the ass and draws to much amps. Here’s a link to the clamps that I use.
Nilight 90020B 2 Pack Mounting Bracket Kit LED Off Road Light Horizontal Bar Tube Clamp Roof Roll Cage Holder, 2 Years Warranty https://www.amazon.com/dp/B0714CYKBJ/?tag=sxsweb24-20

 

[Robobrainiac]

I am not sure if you have seen these yet.

Bumper Wings | Honda Pioneer 1000/Pioneer 1000-5

Honda Front Bumper Panels w/ 6in LED Light Bars (16-20 Pioneer 1000)

www.roughcountry.com

 

[Smitty335]

I am not sure if you have seen these yet.

Bumper Wings | Honda Pioneer 1000/Pioneer 1000-5

Honda Front Bumper Panels w/ 6in LED Light Bars (16-20 Pioneer 1000)

www.roughcountry.com

I like those.

 

[Alaska350]

I don’t have a pic of it currently but if you invert your brackets on your bumper you can use that small white bar in the middle and it won’t interfere with your hitch plate. again, look at lifetime LED. They’re smaller put out a butt ton of light guaranteed for life and I’ve had mine submerged Many many times without issue. The pic I do have of this light is on my LE bumper in the middle

not sure what you mean by inverting the brackets. the hitch mount is bolted through the top and the bottom where the winch roller is so flipping it wont work.

 

[Alaska350]

I’m gonna dump the light bar by the way. It’s a pain in the ass and draws to much amps. Here’s a link to the clamps that I use.
Nilight 90020B 2 Pack Mounting Bracket Kit LED Off Road Light Horizontal Bar Tube Clamp Roof Roll Cage Holder, 2 Years Warranty https://www.amazon.com/dp/B0714CYKBJ/?tag=sxsweb24-20

Those are actually the ones i bought but hated the look of them because they were slightly slanted......OCD man.

 

[Robobrainiac]

I don’t have a pic of it currently but if you invert your brackets on your bumper you can use that small white bar in the middle and it won’t interfere with your hitch plate. again, look at lifetime LED. They’re smaller put out a butt ton of light guaranteed for life and I’ve had mine submerged Many many times without issue. The pic I do have of this light is on my LE bumper in the middle
View attachment 323180

Where did you get the headlamp halos?

 

[Remington]

Where did you get the headlamp halos?

If i told you Id have to kill you! 😂 🥳

found them on Ebay 3 years ago when I was looking to update my std lights for deluxe LED’s havent seen them on there in a few years tho