P1000 Rocker switches mounted in dash between the steering column and the OEM light switch.

[Prntckt]

Has anyone had any luck mounting rocker switches in this location? It looks like three may fit there nicely. Thought I‘d ask and see if anyone had success with this before I started cutting holes in the dash. The usual switch location in the center of my dash has several heater ducts in it, and no room for switches

 

[Admin]

 

[TripleB]

Has anyone had any luck mounting rocker switches in this location? It looks like three may fit there nicely. Thought I‘d ask and see if anyone had success with this before I started cutting holes in the dash. The usual switch location in the center of my dash has several heater ducts in it, and no room for switchesView attachment 250440View attachment 250442

I have a horizontal turn signal rocker switch there. I cant remember how much more room was there. I also have a winch rocker switch on the other side of the steering wheel. I use to have my fan override rocker switch on the other side of where u have the vents. Inside the red circle. Had to move it cause my passengers keep pushing it accidentally. I now have a dual USB charger in that spot.

 

[Prntckt]

TripleB,
Thanks for the reply.
I’ll do some further investigation of the room behind the dash to the right of the OEM light switch this weekend.
The circled area is scheduled for a future Ram Mount In my rig.

 

[TripleB]

TripleB,
Thanks for the reply.
I’ll do some further investigation of the room behind the dash to the right of the OEM light switch this weekend.
The circled area is scheduled for a future Ram Mount In my rig.

I have a ram mount there in my 3 seater.

 

[TripleB]

Thats how the 5 seater is set up. That ram mount only has 2 screw holes so I used a backing plate on it. It works great holding my 8 inch tablet in a heavy tablet holder.

 

[Prntckt]

View attachment 250466View attachment 250467View attachment 250468
Thats how the 5 seater is set up. That ram mount only has 2 screw holes so I used a backing plate on it. It works great holding my 8 inch tablet in a heavy tablet holder.

What tablet and software are you using? I assume you're using gps mapping software on it?

 

[TripleB]

What tablet and software are you using? I assume you're using gps mapping software on it?

I've got lifetime trail maps on a 8" Samsung galaxy tab a tablet.

 

[Prntckt]

Thanks, Im looking to replace my puny Garmin gps.

 

[NMelkaholic]

Did this yesterday... my horn will go right above the turn signal switch.

 

[Remington]

Yup, can be done! A bit of a whore, but it can be done.