P1000 Rock Light Wiring

[jpanicaro]

Hi everyone, I am getting ready to install my rock lights in the fender wells. Where has everyone run the wiring for the rock lights to the controller? Thanks guys.

 

[Admin]

 

[Mudwing]

Hi everyone, I am getting ready to install my rock lights in the fender wells. Where has everyone run the wiring for the rock lights to the controller? Thanks guys.

I have a 7hundo but same concept. I ran my wires along the Honda wiring harness from the rear to the front. Staying away from the exhaust or moving parts. I had to use ten foot extensions for the rear. I’ve installed eight total lights.😎🤣

 

[Pilotadam]

I basically did the same thing expect i have the controller mounted under the seat. made it easier to run wires to the rear and to the front. Plus i tied it into the brake light. For the rear light i have them mounted to the bed side so I had to run them to the back where the stock light harness are. I am still trying to figure out where to place the front light pods.

 

[ProudDadOf5]

Here’s how and what I did to mine.. Hope it helps.. I had to order extension wires (6’, four pin) for the back 3 cause stocks were only 10’ & wouldn’t reach under the hood.. Link below.. 🍻✌🏼🕷PDO5

2019 P1K5 Black Widow! - The Honda Side by Side Club!