P500 Reverse light wiring

[hondabob64]

I’ve bought a Honda OEM sub harness to power two rear mounted led cubes as back up lights. It plugs in under the hood & I believe the yellow or blue wire is the trigger wire for the back up alarm (which I’ll be using for power). Any one else try this?

 

[Admin]

 

[trigger]

That sub harness just plugs into the cig lighter accessory circuit. 4 hots and 2 grounds...no trigger.

 

[Todd627]

I believe @Hondasxs is currently working on a "plug N play" reverse light for the P500.....

 

[JCart]

I use a VisionX small LED back up light, very bright, in center of cab rear facing. As I have auxiliary battery underhood I wired to that with a relay and switch inside cab lower center of dash.

Mine has a white beam.

LED-Utility-Flood-Light

 

[Hondasxs]

I believe @Hondasxs is currently working on a "plug N play" reverse light for the P500.....

I will have the plug-n-play reverse triggers ready early next week.
This ONLY gives you a ground trigger point.
Hook it to the light and + to the light and it comes on when in R.
You can also use it to trigger a relay. The relay will then be your + switch.

 

[Lilred500]

I will have the plug-n-play reverse triggers ready early next week.
This ONLY gives you a ground trigger point.
Hook it to the light and + to the light and it comes on when in R.
You can also use it to trigger a relay. The relay will then be your + switch.

Is the trigger switch available now?

 

[Hondasxs]

Is the trigger switch available now?

Yes.
I have 2 ready.
I'll send you a message.

Sent from my SM-G955U using Tapatalk

 

[Tstover]

Yes.
I have 2 ready.
I'll send you a message.

Sent from my SM-G955U using Tapatalk

Any more of these ready?

 

[KevinAxe]

Does anyone know how much current the reverse trigger will sink? Will a relay be needed with an LED light that pulls 0.75 amps?

Thanks,
Kevin

 

[Hondasxs]

Does anyone know how much current the reverse trigger will sink? Will a relay be needed with an LED light that pulls 0.75 amps?

Thanks,
Kevin

Did you already install the backup light trigger kit?

Cant speek for the factory backup alarm kit. But the one I designed for the he 500 can handle a few amps.
Thanks.

 

[KevinAxe]

Just got the backup alarm harness from Honda but haven't installed it yet. Guess I'll play it safe and put in a relay. Thanks.

 

[Scrapiron]

Any more of these ready?

Where can we get one