Talon retractable harness

[Scooter14]

Anyone make a bolt in retractable harness for the Talon.
Thank you

 

[Admin]

 

[snuffnwhisky]

X3 or RZR OEM retractables are all that I have found. Usually are used X3 belts on Ebay. Either one is going to require fab.

 

[bbtank45]

I pick up my Talon R on Saturday and am looking for the same thing, retractable harnesses. How do the harnesses connect to the bar behind the seats?

 

[ohanacreek]

The X3 XRS retracts are awesome they function very well. The lower is a standard harness and manually adjustable the uppers are where the retracts are.

I’ll be buying another set for the Talon.

 

[bjniceguy]

I have the X3 ones in my YXZ (Bought passenger side ones that don't have electronics in them & had to fab brackets). The only issue I have had with them is the retract part pulls up on them constantly and after a couple hours they get out of adjustment & start riding up. If I we going to install retractable in the Talon, I would look at the Click 6 version for Polaris as they would stay down. Only bad thing about them is they say Polaris on them & you would have to have upolstry shop cover that up LOL.

 

[snuffnwhisky]

I have the X3 ones in my YXZ (Bought passenger side ones that don't have electronics in them & had to fab brackets). The only issue I have had with them is the retract part pulls up on them constantly and after a couple hours they get out of adjustment & start riding up. If I we going to install retractable in the Talon, I would look at the Click 6 version for Polaris as they would stay down. Only bad thing about them is they say Polaris on them & you would have to have upolstry shop cover that up LOL.

The click 6 look really good. I havent found any used sets and are 500+ for a set new.

 

[Ezgoin]

The click 6 look really good. I havent found any used sets and are 500+ for a set new.

I have the Click 6 harnesses in my RZR and aside from being stupid expensive ...$250 ea., I love them. I don’t think they will work on the Talon though. The Click 6 is designed specifically to mount on the RZR brackets.

 

[ohanacreek]

X3 or RZR OEM retractables are all that I have found. Usually are used X3 belts on Ebay. Either one is going to require fab.

CANAM CAN AM MAVERICK X3 SEAT SAFETY BELT SEATBELT FULL SET 4 POINT HARNESS IMMI | eBay

 

[JTW]

So mine mount a little different.. they mount to the clamps I welded the angle on.. the harness bar is a removable bar from brick city fab. Point being, you can make anything work. Except maybe an uppity cotton picker.

 

[bjniceguy]

the Canam ones have to be mounted a certain direction (horizontal if remember correctly) to retract correctly. You may want to go to a Canam dealer and look how the set orientation wise. I assume Polaris Click 6 require correct angle also.

 

[ohanacreek]

the Canam ones have to be mounted a certain direction (horizontal if remember correctly) to retract correctly. You may want to go to a Canam dealer and look how the set orientation wise. I assume Polaris Click 6 require correct angle also.

For the CanAms you’re correct the mounting bolt has to point as straight up as possible.

 

[JTW]

For the CanAms you’re correct the mounting bolt has to point as straight up as possible.

@Kilo427 don’t and seem to work ok..

 

[Kilo427]

True they don’t have to be exactly that angle.

 

[ohanacreek]

@Kilo427 don’t and seem to work ok..

But if it’s steep up or down and they are mounted off horizontal you’ll lose functionality

 

[Kilo427]

Im not sure I have ever experienced an angle they didn't work and I have been at most of the angles that are possible.

 

[ohanacreek]

Im not sure I have ever experienced an angle they didn't work and I have been at most of the angles that are possible.

I can vouch for that.