Rear wheel bearings

[Dankathy]

I am aware that the rear wheel bearings have play in them when they are new because they are double roll ball bearings, not tapered timkens. I dont pretend to remember what these were like when they were new, but mine seem to have a lot of movement in them. So, the question is, how to measure- pull the brake caliper off, put the wheel back on and measure at the rim? How loose is to loose? Kind of would like to do a measurement, not a judgment call.

 

[Admin]

 

[Dug2024]

I had what I thought was play in the rear bearings...top to bottom... but it turned out to be the radius rod bushings...
Check it close....

 

[stephanedube]

I had what I thought was play in the rear bearings...top to bottom... but it turned out to be the radius rod bushings...
Check it close....

samething here .......

 

[jackw13]

Mine is at the dealer now and am waiting to hear what they say. I noticed the play when I put on new tender springs . I could wiggle left rear wheel up and down, and front to rear appox. 1/4". Other wheels were tight. This machine has 1100 miles now . I never hit anything , which is the first thing I was asked. I took it in Mon. , and haven't heard a word . I called twice left a message but no return call.

 

[jackw13]

Up date: Brought machine home , will wait until Honda makes deciesion on warranty , and sends out parts .Dealer thinks another week or so.

 

[jackw13]

Dug2024 I also have rear arm bushings lose . Did honda fix under warranty ? Mine is a R .

 

[Dug2024]

Dug2024 I also have rear arm bushings lose . Did honda fix under warranty ? Mine is a R .

I just replaced mine with high clearance radius rods from s3 s3 Powersports..