P1000 rear seat belts dangle without side mesh.....

[tbrandnc]

Within the first hour of riding my 1000-5, a tree branch ripped the rear side mesh, so I removed both rear side meshes.
My first issue, is that the rear seat belts now dangle because the mesh has a hook on an elastic band to secure its male belt clip.
Anyone found a solution (e.g. a 3D printed female clip attached to the belt container..... any thoughts?

 

[Admin]

 

[WagginTail]

Within the first hour of riding my 1000-5, a tree branch ripped the rear side mesh, so I removed both rear side meshes.
My first issue, is that the rear seat belts now dangle because the mesh has a hook on an elastic band to secure its male belt clip.
Anyone found a solution (e.g. a 3D printed female clip attached to the belt container..... any thoughts?

I just hung them on the plastic hook on the seat belt mechanism cover and zip tied them there. Mine very rarely get used though

 

[Remington]

Within the first hour of riding my 1000-5, a tree branch ripped the rear side mesh, so I removed both rear side meshes.
My first issue, is that the rear seat belts now dangle because the mesh has a hook on an elastic band to secure its male belt clip.
Anyone found a solution (e.g. a 3D printed female clip attached to the belt container..... any thoughts?

Welcome from Michigan.
Yeah just hook them on the seatbelt plastic a zip tie them.

So, 2 posts and we have some issues,
1 we need a state not a zip code for location.
2 no info on this 1000-5, year, Color, miles?
Oh hell will just skip to #4 do an intro thread and pics of your rig, Pics Or It Didnt Happen!

 

[Hello_Darkness]

That's not what the hook is for, it's to secure the nets when their rolled up.

Like @WagginTail said, there is a hook on the plastic cover for the retractor, that's where they should hang

 

[tbrandnc]

Within the first hour of riding my 1000-5, a tree branch ripped the rear side mesh, so I removed both rear side meshes.
My first issue, is that the rear seat belts now dangle because the mesh has a hook on an elastic band to secure its male belt clip.
Anyone found a solution (e.g. a 3D printed female clip attached to the belt container..... any thoughts?

Good idea, zip ties to the rescue….

 

[Remington]

Like @WagginTail said, there is a hook on the plastic cover for the retractor, that's where they should hang

 

[Remington]

Good idea, zip ties to the rescue….

And how bout a camera and some pics to the rescue?
Just mess with ya!
POIDH

 

[Hello_Darkness]

Good idea, zip ties to the rescue….

Unless you've removed the covers you don't need zip ties, they'll hang there forever.

Unless you flip over

 

[Dirtstiffs-1000]

 

[GolfCart]

Agree, I've had mine hooked up there without zip ties and they have never come off, although I haven't had mine on the roof.

 

[toddvdh]

Agree, I've had mine hooked up there without zip ties and they have never come off, although I haven't had mine on the roof YET.

Fify