joeymt33
i4WD=imitated 4WD
Moderator
Lifetime Member
Supporting Member
Club Contributor
I'm having a hard time removing this splines coupler from the diff. It must be removed to replace the seal. Last time a seal was leaking, I was able to push the seal back in without removing this. The seal is still leaking so now I must remove this to put a new one in it.
This retaining ring is on the end of the pinion shaft. I cannot get it out. This is a new one that I purchased just in case I break the old one
Here's a picture of what I'm working on
This retaining ring is on the end of the pinion shaft. I cannot get it out. This is a new one that I purchased just in case I break the old one
Here's a picture of what I'm working on