P1000 Rear Bed Strut

[russknight]

Anyone have a good way to compress the bed assist strut when reinstalling it?

 

[Admin]

 

[ODAMO]

Take the rubber snubbers out of the bed hinge. This will allow you to raise the bed about another inch and the mounting post will lign up with the now fully extended strut.
As a side benefit, if you leave the snubbers out you gain quite a bit of bed angle for easier maintenance.

 

[russknight]

Take the rubber snubbers out of the bed hinge. This will allow you to raise the bed about another inch and the mounting post will lign up with the now fully extended strut.
As a side benefit, if you leave the snubbers out you gain quite a bit of bed angle for easier maintenance.

Boom! Thank you!

 

[Dirtstiffs-1000]

Just use a ratchet strap and pull the bed up slightly higher against the bump stops.

Thread 'Pioneer 1000 5 Dump Bed - Lift Strut Replacement - Heavy Duty' P1000 - Pioneer 1000 5 Dump Bed - Lift Strut Replacement - Heavy Duty

 

[ODAMO]

Boom! Thank you!

👍

 

[russknight]

👍

Worked like a charm!