P1000 Ram mount

[Soaz1000]

Did a search and couldn't find if the Ram mount suction cup holds up mounted to the lower windshield on a flip up windshield near the window leaver, and if they do do you have to use the extended arm to clear the lower windshield lip ? Also thought about mounting it in the cubby hole below the big warning sticker. My warning panel is filled up with switches so no room there.
I did see a picture of one mounted in the cubby but don't know if it was a suction mount . I believe that person has sold that machine and isn't on the forum much. Thanks for your input.

https://www.amazon.com/gp/aw/d/B00DI2W24O/?tag=sxsweb24-20

 

[Admin]

 

[Mark in Northern Iowa]

I mounted my ram mount on the left.
I know you asked about suction cup, but maybe it would work for you.
I replied in a 500 thread, but my mount is on my 1000-3.

P500 - Phone/Camera Mount?

I've tried mounting my iPhone 7 with a Ram-Mount to the dash and the frame of glass windshield with horrible video results. Too much vibration make videos unviewable. What you all using with better luck? I'm thinking about a Ram tough claw mount to the rops. https://www.rammount.com/part/RAP-B-404U

hondasxs.com

.
Have a good day

 

[bumperm]

I you use a RAM mount on the windshield, probably a good idea to put a sticker on the front side to protect things from UV.

 

[Scoop]

I you use a RAM mount on the windshield, probably a good idea to put a sticker on the front side to protect things from UV.

@Backwoods has a few things to put on the front of a windshield. 😆

 

[Vikes79]

Did a search and couldn't find if the Ram mount suction cup holds up mounted to the lower windshield on a flip up windshield near the window leaver, and if they do do you have to use the extended arm to clear the lower windshield lip ? Also thought about mounting it in the cubby hole below the big warning sticker. My warning panel is filled up with switches so no room there.
I did see a picture of one mounted in the cubby but don't know if it was a suction mount . I believe that person has sold that machine and isn't on the forum much. Thanks for your input.

https://www.amazon.com/gp/aw/d/B00DI2W24O/?tag=sxsweb24-20

Not sure what your trying to hold, but I’ve never liked anything attached to the poly windscreen….shakes way to violently. I also don’t get the need for the 105” tablet etc either.

This is what I use to hold my phone in my SXS , boat, and my vehicle with the suction mount if I need it. My phone mostly is the radio. Might use it for trails time to time.

The ball is thru bolted so it won’t work itself loose.

 

[Dirtstiffs-1000]

I mounted the extendable Ram mount / Tablet holder on the upper - underside of the cubby. It will swivel the screen up and over the switches and right to left, if I choose.
Don't use the cubby and minimizes Tablet dust too. JMO. Cheers!

 

[Red500]

Like was already said, I think the hole buggy shakes too much for a suction cup to work.