This box mounts on upper frame crossmember between front shocks worked out quit well. This is powering a winch and wet sounds 10 also installed with a isolator using factory installed winch wiring that runs to the stock battery so it will charge this second battery.
View attachment 152706 View attachment 152707 View attachment 152708
Just one I built myself with 3" by 1/8 steel the bottom is 3" x 7 1/2" then the 2 end sides are 3" × 7 then back was 3" x 7 1/2" the I welded two studs to for mounting. The front has two 1" by 1/8 thick straps cut 7 1/2" in lengthLooks good, is that a kit or just one you put together yourself.
Sent from my iPhone using Tapatalk
Fits the Oddessy Extreme pc680 battery perfectly.