P1000 Quick Shield

[packer58]

Well, after reading comment after comment about how well the Quick Shield works I finally purchased one from @trigger. If it works as well as everybody claims I'll be a happy man for sure. Bow season is right around the corner here in Cali and it's been hot as hell here lately.

 

[Admin]

 

[Scoop]

I went a different route with my P1K5 (fashioned my own) and it works great!

But I'm going to order a Quick Shield from @trigger for the new Talon. Easy peasy.

 

[Robobrainiac]

You will enjoy it.

I just buy all of them and keep stacking them.

 

[Robobrainiac]

I forgot to mention, an under seat fan helps as well.

 

[packer58]

I forgot to mention, an under seat fan helps as well.

Yes ......I have a bilge fan setting in my "THINGS TO DO " pile in the garage, need to put a mount together and get that done. When i installed my club store auto back-up / work light harness under the machine i wasn't smart enough to loom in the power for the fan while i had the skid off and was already under there .....

 

[NTCPrezJB]

Yes ......I have a bilge fan setting in my "THINGS TO DO " pile in the garage, need to put a mount together and get that done. When i installed my club store auto back-up / work light harness under the machine i wasn't smart enough to loom in the power for the fan while i had the skid off and was already under there .....

Sounds like something I’d do .. or not do and have to do it all again as well.

 

[richardhowland6626]

Hello
Just got my quicksheild any install videos out there? or intructions?
Thanks!

 

[trigger]

Hello
Just got my quicksheild any install videos out there? or intructions?
Thanks!

Remove the seat bottom and seat back, five 10mm bolts. Remove nut for middle seatbelt. Logo goes up and forward. Slide seatbelt latches through slits in shield and fit it up the back to line up bolt holes for seat back. Put it back together.

 

[richardhowland6626]

Thanks so much!!

 

[RacinJasonWV]

Hello
Just got my quicksheild any install videos out there? or intructions?
Thanks!

You’ve probably already got it installed but here’s some simple instructions I shared a while back. P1000 - SuperATV Windshield Handle Extension & Quick Shield Installation

 

[Hughespat90]

Just ordered my quickshield, I already have dual fans under the seats that helps out big time but a little more shouldn’t hurt

 

[Remington]

Just ordered my quickshield, I already have dual fans under the seats that helps out big time but a little more shouldn’t hurt

Cool you will like it!

Question tho, Never heard of the state called Flushear? Is that a new providence of the People's Socialist Republic Of Kalifornia? 🥳

 

[Dirtstiffs-1000]

Yes ......I have a bilge fan setting in my "THINGS TO DO " pile in the garage, need to put a mount together and get that done. When i installed my club store auto back-up / work light harness under the machine i wasn't smart enough to loom in the power for the fan while i had the skid off and was already under there .....

I have some 3 wire romex laying around I use as a wire fishing tool. Works great for getting wiring front to back and through the belly pan. I think I also used a chunk to wire some lights up that way.

 

[Jerryg]

Swamp Ass Denied.