thanks in advance! i am installing side/alley light pods, each on their own switch/circuit for individual control. the pods are 120W so 10 amps each (Amazon.com: Nilight 18022C-B 6.5Inch 2PCS 6.5 Inch 120W Spot & Flood Combo Bar Driving Waterproof Led Work Light Triple Rows Off-Road Truck Car ATV SUV Jeep Cabin Boat, 2 Years Warranty: Automotive)
if i had to guess, total wire run is maybe 8 feet to the front.
@RobSparre diagram recommends using a relay for higher current/longer distances (just unsure what the criteria is)
1. do i need to put a relay? or can i just run them to the fuse block/switch without it?
2. if yes to the relay, would i get a 15 or 20 amp relay (not a 10)?
if i had to guess, total wire run is maybe 8 feet to the front.
@RobSparre diagram recommends using a relay for higher current/longer distances (just unsure what the criteria is)
1. do i need to put a relay? or can i just run them to the fuse block/switch without it?
2. if yes to the relay, would i get a 15 or 20 amp relay (not a 10)?