P1000 Pre Filter

[kyrider1000]

Looking for some ideas for a pre filter for my 1000 , I've seen a few that were thru hood , but i don't want to do that . Just trying to keep a clean look . The old OEM pre filter is worthless .

Ride em safe

 

[Admin]

 

[bumperm]

There are previous posts on this. Some used a rubber extender to move the filter up, center, and a few inches higher - since I'm in Nevada and unlikely to find a deep mud puddle (that's not already claimed by a half dozen ducks and other critters), I just put mine where it's convenient.

 

[Scoop]

Search first? Or just look below?

 

[Mopower58]

I used the lower radiator hose snorkel then attached a foam UNI 3" ID filter to the end of it.

Uni UP-4300ST Clamp On Dual Stage Air Filter 3" 76mm Straight Flange Air Filter | eBay

Durable urethane mounting flange for long life and better fit. Filter is 4-3/4" round x 5.25" long. Seamless design for maximum air flow.

www.ebay.com

Excuse the dust.

 

[kyrider1000]

There are previous posts on this. Some used a rubber extender to move the filter up, center, and a few inches higher - since I'm in Nevada and unlikely to find a deep mud puddle (that's not already claimed by a half dozen ducks and other critters), I just put mine where it's convenient.

View attachment 388730

Whats your part number on the filter ? I have mud here in ky.

 

[Robobrainiac]

I used the lower radiator hose snorkel then attached a foam UNI 3" ID filter to the end of it.

Uni UP-4300ST Clamp On Dual Stage Air Filter 3" 76mm Straight Flange Air Filter | eBay

Durable urethane mounting flange for long life and better fit. Filter is 4-3/4" round x 5.25" long. Seamless design for maximum air flow.

www.ebay.com

Excuse the dust.
View attachment 388732

What did you use between the filter and hose?

 

[Mopower58]

What did you use between the filter and hose?

A short piece of aluminized 3" exhaust tubing.

 

[Robobrainiac]

Thank you. I am ordering mine now

A short piece of aluminized 3" exhaust tubing.

 

[Remington]

Looking for some ideas for a pre filter for my 1000

 

[Scoop]

For the record, I ordered all the bits to do mine like @ToddACimer did in this thread. Just have to get around to doing it.

 

[Mopower58]

Thank you. I am ordering mine now

A lot of auto parts places would probably have the pipe. I think it's only 4 or 5 inches long.

 

[Remington]

4 or 5 inches long.

🫣

 

[Mopower58]

🫣

Don't hate because I'm bragging!

 

[ToddACimer]

I think it looks cool. It definitely works well for both dust and water

 

[Scoop]

If anyone is interested in doing it the way @ToddACimer did it (his post), the link for the 3" tube is bad. But I found the same 3.0" ID aluminum tube on Amazon in 18" length (exact same mfg, exact same tube, longer), so you can cut it your 12.5" and 5.0" pieces out of the single piece: https://www.amazon.com/gp/product/B0C2HHZYKP?tag=sxsweb24-20

The silicone 90 °elbows & (2) clamps (need two of these elbows & clamp sets):

https://www.amazon.com/gp/product/B074V6HJ7S?tag=sxsweb24-20

Snorkel head (price went up $12 right after I ordered the last one @ Amazon warehouse): https://www.amazon.com/gp/product/B08Y5V53MB?tag=sxsweb24-20

EDIT: Just found it on Ebay for cheaper: https://www.ebay.com/itm/323955604755 or this one https://www.ebay.com/itm/254721373285

Extra clamp (1 needed):

https://www.amazon.com/gp/product/B004MEA4H4?tag=sxsweb24-20

or the one a few here have ordered:

https://www.amazon.com/Dixon-13MHHM300-Stainless-Steel-Single/dp/B007VY89EM?tag=sxsweb24-20

 

[PJon]

There are previous posts on this. Some used a rubber extender to move the filter up, center, and a few inches higher - since I'm in Nevada and unlikely to find a deep mud puddle (that's not already claimed by a half dozen ducks and other critters), I just put mine where it's convenient.

View attachment 388730

I have mine set up the same way and it works great.

 

[someguy1313]

nice