Portals

[jcash3485]

Seen this on a Facebook group. I know some of you been wanting this. What you think.

Sent from my SM-G920T using Tapatalk

 

[Admin]

 

[joeymt33]

That's really cool! When I had the pioneer 700, I had the track width widened by approximately 2 inches per side and had a 3 inch lift kit. The machine was still geared to high with 28 inch tires so these gearboxes while expensive are actually a wheel spacer, lift kit and gear reduction all-in-one.

The only concern I have with these gearboxes is they will add a twisting force to the A-arms that could exceed what they were designed for. There have been many members of this forum including myself that has had the A-arm mounts tear from the frame without running these gear reductions.

If I still had the pioneer 700, I would probably take a serious look at these but also beef up the A-arm mounts at the same time.

Thanks for sharing.

 

[d_b]

Oh yea its all coming together now....I'm in.

 

[jcash3485]

lots of money. they say for the 6" lift set you need 18" wheels.

 

[d_b]

6" may be a little much for my build. But 18" are everywhere with are bolt pattern. Think auto.