Plastic repairs on Talon

[Cuffy Meigs]

Can anyone point me to a source for a piece of plastic, similar thickness as interior plastic, for patching a hole drilled in wrong spot. A 12" x 12" piece would be perfect for this and future mistakes. Appreciated. Thanks

 

[Admin]

 

[GovtMule]

Can anyone point me to a source for a piece of plastic, similar thickness as interior plastic, for patching a hole drilled in wrong spot. A 12" x 12" piece would be perfect for this and future mistakes. Appreciated. Thanks

If it’s not a huge hole, I’d get some plastic weld epoxy, tape from the top, and fill in the void from the other side. Probably never get it perfect but it would fill the hole, and with the tape on the finished side you wouldn’t have to do any sanding.

 

[Cuffy Meigs]

Thanks for the idea. I actually found some plastic sheets on Amazon, used the wrong search language. Is a 2.5" hole for heater vent.

https://www.amazon.com/dp/B0CCMNPWGW/?tag=sxsweb24-20

 

[GovtMule]

Thanks for the idea. I actually found some plastic sheets on Amazon, used the wrong search language. Is a 2.5" hole for heater vent.

https://www.amazon.com/dp/B0CCMNPWGW/?tag=sxsweb24-20

That might be a tad bit too much for my idea!

 

[Jankyeye]

You may be able to use the piece you cut out with one of these do-dads.

Amazon.com

 

[JACKAL]

Can anyone point me to a source for a piece of plastic, similar thickness as interior plastic, for patching a hole drilled in wrong spot. A 12" x 12" piece would be perfect for this and future mistakes. Appreciated. Thanks

Your OEM skidplate that should have been replaced day 1 is a good source of material.

 

[Cuffy Meigs]

Your OEM skidplate that should have been replaced day 1 is a good source of material.

I have read that in a couple threads here. Thanks Jackal

 

[Cuffy Meigs]

You may be able to use the piece you cut out with one of these do-dads.

Amazon.com

Cool tool.

 

[Cuffy Meigs]

Your OEM skidplate that should have been replaced day 1 is a good source of material.

Thanks Gmule. Will look for one. Any recommendations?