wow thats a lot of oilFor a Pioneer 1000 5--- Calls for 6.8 qt of oil with the filter being changed Now it looks like it's overfilled Thoughts Comments Suggestions
did you check it the way the manual tells you to? The 700 needs to be ran for a few minutes at idle before checking, not sure about a p1k
Yes ran at idle 3 to 4 min waited 2or3for the oil to drain to the sump as well How much oil does the 700 take?did you check it the way the manual tells you to? The 700 needs to be ran for a few minutes at idle before checking, not sure about a p1k
That's correct! Now it's time to drain some oil!It's only 6 qts with oil filter change and 6.1 with oil filter and dct filter change
The transmission and engine are separate I believe Why would one affect the other?? Just going off the owners manualThat's correct! Now it's time to drain some oil!
The transmission and engine are separate I believe Why would one affect the other?? Just going off the owners manual
Just figured it out the Owners manual is wrong Page 247 spec.is correct at 6.08 quarts TheWhat oil did you use?
Thanks and the owner manual is incorrect as well Page 247 under specs. says 6.08 quarts Under the quick reference guide is reads 6.8 quartsThe subtrans is separate from the engine. The engine and tranny are lubed by the same 6 qts.
I just add oil Intel full it depends on how long you let it drain it may not need 6 quarts to male it full.Just figured it out the Owners manual is wrong Page 247 spec.is correct at 6.08 quarts The
Thanks and the owner manual is incorrect as well Page 247 under specs. says 6.08 quarts Under the quick reference guide is reads 6.8 quarts