Aluminum angle: 1x8 thick x 1/4 x 1/2 ( another project left overs )
Fabricated Aluminum Frame ( spot welded on back side )
Cut out <>Side Panel to fit the Frame <> ( held in place with 4 Stainless 3/16x3/4 bolts & lock nuts )
Trimmed <> the piece cut out <> to fit inside the new frame <> ( held in place with 4 Push Pins )
Finished opening is 6-1/2 square. ( No sharp edges )
<
Pictures tell Best:
![20220701 125214 20220701 125214](https://hondasxs.com/data/attachments/340/340752-29642c421ae2f1a0a04be8e90c9bc1cc.jpg)
Fabricated Aluminum Frame ( spot welded on back side )
Cut out <>Side Panel to fit the Frame <> ( held in place with 4 Stainless 3/16x3/4 bolts & lock nuts )
Trimmed <> the piece cut out <> to fit inside the new frame <> ( held in place with 4 Push Pins )
Finished opening is 6-1/2 square. ( No sharp edges )
<
Pictures tell Best:
![20220701 125506 20220701 125506](https://hondasxs.com/data/attachments/340/340750-47940797b656494e18c4c53b1cabb6f6.jpg)
![20220701 125025 20220701 125025](https://hondasxs.com/data/attachments/340/340751-6e10bc39cd172f5dbbd13f451271e027.jpg)
![20220701 125214 20220701 125214](https://hondasxs.com/data/attachments/340/340752-29642c421ae2f1a0a04be8e90c9bc1cc.jpg)