![Idahotruckman](/data/avatars/m/34/34173.jpg?1613601068)
I installed the 1.5" spacers on the rear of the 500 yesterday. I am somewhat perplexed. When threading the nuts in the spacer holes on to the threaded stud bolts I noticed that when the nuts were torqued to specs, the tip of the bolt was recessed inside the nut almost .25" . I am used to the bolts poking out of the nuts at least a couple of threads. I would feel better if the nut had more bolt to grab on to.
Is this a normal situation with wheel spacers?
![PXL 20210307 213951269 PXL 20210307 213951269](https://hondasxs.com/data/attachments/258/258534-56ba8644f608df74adf8e967eaf5260b.jpg)
Is this a normal situation with wheel spacers?
![PXL 20210307 213951269 PXL 20210307 213951269](https://hondasxs.com/data/attachments/258/258534-56ba8644f608df74adf8e967eaf5260b.jpg)