P1000 OEM flip windshield brackets

[MarkM]

I’m looking for extended flip up window brackets for an OEM windshield.
Just wondering what everyone has done other than taking a sledge hammer to it.
Can someone direct me where I can purchase please?

 

[Admin]

 

[GovtMule]

TMugg windshield brackets and Crossroads3D cup holders

View attachment 372199 View attachment 372200

Then apply a google search. Should find what you need…

 

[MarkM]

Then apply a google search. Should find what you need…

Been there, done that, and the only option i can find is that same guy on Facebook. I’m not on Facebook so no way to contact him.
Figured (hoping) someone on here has done the same to their windshield that could help me out with info?

 

[GovtMule]

Been there, done that, and the only option i can find is that same guy on Facebook. I’m not on Facebook so no way to contact him.
Figured (hoping) someone on here has done the same to their windshield that could help me out with info?

Isn’t there a contact info attached to the FB posts?

 

[MarkM]

Isn’t there a contact info attached to the FB posts?

I don’t have access since I’m not on fb.

 

[Russ989]

I’m looking for extended flip up window brackets for an OEM windshield.
Just wondering what everyone has done other than taking a sledge hammer to it.
Can someone direct me where I can purchase please?

I can personally say this company is great, they are about 20 miles down the road from me.

PBR Products for Honda Pioneer 1000 - 700 Split Honda Windshield Extenders PAIR

These are made of 3/16" steel and powder coated black. They extend the opening on the Honda factory windshield from approx 4" to over 8". The airflow difference is drastically different. It will help with the heat inside the cab. Comes with all mounting hardware and uses some stock hardware. You...

www.pbrproducts.com

 

[MarkM]

I can personally say this company is great, they are about 20 miles down the road from me.

PBR Products for Honda Pioneer 1000 - 700 Split Honda Windshield Extenders PAIR

These are made of 3/16" steel and powder coated black. They extend the opening on the Honda factory windshield from approx 4" to over 8". The airflow difference is drastically different. It will help with the heat inside the cab. Comes with all mounting hardware and uses some stock hardware. You...

www.pbrproducts.com

Thanks very much. I have looked at those previously. I was hoping to find a hinged bracket so it’s tucked away when closed. Might have to resort to these.
I see they sell light brackets as well so maybe I’ll order a set of them at the same time. 👍

 

[GovtMule]

I don’t have access since I’m not on fb.

I don’t FB either so can’t help anymore.

 

[MarkM]

I don’t FB either so can’t help anymore.

All good! Appreciate it.
I have a buddy who is going to reach out to the guy on fb. I’ll be sure to mention this site as well for others who might be interested.

 

[Remington]

Been there, done that, and the only option i can find is that same guy on Facebook. I’m not on FACETURD so no way to contact him.
Figured (hoping) someone on here has done the same to their windshield that could help me out with info?

Fixed it for ya again!! 🤨

 

[MarkM]

Fixed it for ya again!! 🤨

🤣 🤣🤣🤣

 

[tjoreo]

I installed the above PBR brackets and they really helped bringing in the cooler air for the summer. I believe they had them on sale for $30 and for that they were a great upgrade. I'm 5'10" and my only complaint is they put the angled lower lip of the upper windshield right in my line of sight. I ended up making my own off their design that are a few inches longer that opens up the window enough to keep this section out of my line of sight. When the window is closed the brackets nest up against the upper window pretty well, but if you just wanted it open a little the brackets might get in the way.