Yes they are. After months of talking to wheel manufacturers, different people in our side-by-side club finally settled in with the system three wheels.Are they 30's? Looks good
Yes they are. After months of talking to wheel manufacturers, different people in our side-by-side club finally settled in with the system three wheels.
Yes they are. After months of talking to wheel manufacturers, different people in our side-by-side club finally settled in with the system three wheels.
looks great first time posting anything did the 4x3 and 6x1 offsets work out for same width front to back I’ve been waiting to hearYes they are. After months of talking to wheel manufacturers, different people in our side-by-side club finally settled in with the system three wheels.
Pretty close. The rear is 3/8 inch narrower then the front, and the overall width went from 64 1/2 to 66. I think if I had to do it again I would get six by one offset all the way around and do the spacers so you could rotate the tires. It really handles the 30 inch wheels perfectly.looks great first time posting anything did the 4x3 and 6x1 offsets work out for same width front to back I’ve been waiting to hear
Pretty close. The rear is 3/8 inch narrower then the front, and the overall width went from 64 1/2 to 66. I think if I had to do it again I would get six by one offset all the way around and do the spacers so you could rotate the tires. It really handles the 30 inch wheels perfectly.
Three 3/16 inch on each side I can live with . 40 yards on the galloping horse you'll never see itThanks I can live with 3/8” I’m not crazy about spacers
I did not weigh them. But the tires are definitely heavier do too 8 ply and DOT ratedDo you know the weight of your setup? I like your setup a lot. I am looking for a wheel/tire combo on the lighter side if possible! Thanks
What spare carrier are you running? Is it hinges so you can access the bed?
What spare carrier are you running? Is it hinges so you can access the bed?
Talon looks great, my system3 and 31” carnivores will be here this week!
It does hinge from either side but you have to pull The Carter pins . Here's a picture of it on the InternetWhat spare carrier are you running? Is it hinges so you can access the bed?
Talon looks great, my system3 and 31” carnivores will be here this week!
Out of curiosity what offset did you get with the system 3 wheelsView attachment 174761
It does hinge from either side but you have to pull The Carter pins . Here's a picture of it on the Internet
Thank you, that’s what I’m looking forView attachment 174761
It does hinge from either side but you have to pull The Carter pins . Here's a picture of it on the Internet
Looks great! Did anyone you talk to advise against 32” tires on the X? I’m debating with the 32’s or 30’s...
I never asked about 32s because I was just interested only in the 30s. As for the spare tire rack when you swing it over the rollbar it will stay in place I don’t normally do that. Check around they’re making a lot of cool spare tire racks nowadaysLooks great! Did anyone you talk to advise against 32” tires on the X? I’m debating with the 32’s or 30’s...
Also when you swing the spare tire out does it stay put on its own? Or do you have to support it? I have the factory Honda hard storage that I would need to get in and out of...
Awesome thanks for the info!I never asked about 32s because I was just interested only in the 30s. As for the spare tire rack when you swing it over the rollbar it will stay in place I don’t normally do that. Check around they’re making a lot of cool spare tire racks nowadays
I went with 30's I think next time I'll go 32"Looks great! Did anyone you talk to advise against 32” tires on the X? I’m debating with the 32’s or 30’s...
Also when you swing the spare tire out does it stay put on its own? Or do you have to support it? I have the factory Honda hard storage that I would need to get in and out of...
I ordered 32’s. Once I get them on I’ll post a few picsI went with 30's I think next time I'll go 32"