P1000 New A arms

[BillChestnutt]

I’m trying to install my new TTC A arms and don’t have a socket large enough for the hub nut. Can someone help me out with the correct metric size?

 

[Admin]

 

[Neohio]

30mm

 

[BillChestnutt]

Thanks!!

 

[P1K5Dave]

I think I've been able to get by with a 1-1/4" six-sided socket before I got the 30mm.

What kind of TTC kit are you onto?

 

[BillChestnutt]

I’m installing the 3 inch lift kit. I had a bracket lift but didn’t like the angle of the shocks. This way I go back to the stock shock angle and will be adding Fox shocks later this year.

 

[Remington]

didn’t like the angle of the shocks.

Smart man!

 

[P1K5Dave]

Same way I went. I bought my machine with brackets and highlifter front arms, stock shocks. Rode like a brick. Do the shock upgrade as soon as you can and you'll be loving it with the TTC kit.

 

[P1K5Dave]

Here's my thread on it, maybe something in there will be helpful

P1000 - P1K5Dave's TTC 3" Lift and Fox Shock Install

Edit 6/25/21 - I was originally going with the C-fab arms. I changed direction to the Texas Tough Customs kit. Edit 7/24/21 - Removed 814 Trail Series and replaced with Fox QS3s. just decided to blow a wad of money to upgrade my suspension. The parts are on order, and both companies are...

hondasxs.com

 

[BillChestnutt]

Dave, I’ve been reading a lot about your build, even before I started all of my changes. I’m more of a lurker than a poster( not real good around all this computer stuff) . But thanks for the suggestion. I’ve used a lot of the ideas from this forum to make my rig more capable.

 

[BillChestnutt]

I finally got my TTC A arms installed and alignment completed. Everything is tight but not torqued down, does anyone have torque numbers for A arms bolt and ball joints? I remember seeing a post with some numbers but can’t find it now that I need them . I tried searching but didn’t come up with what I need.

 

[JenElio]

I finally got my TTC A arms installed and alignment completed. Everything is tight but not torqued down, does anyone have torque numbers for A arms bolt and ball joints? I remember seeing a post with some numbers but can’t find it now that I need them . I tried searching but didn’t come up with what I need.

🤔........one or two big oouuuggas!! Usually do the job 😂😂 just kidding, not really........ 🤷‍♂️

 

[JenElio]

Oh oh..........we need some pics!!!! I like that TTC stuff, looks like they make some quality products 👍

 

[Remington]

finally got my TTC A arms installed and alignment completed

Pics please!

 

[BillChestnutt]

Here’s the pictures to prove it’s true! ( It didn’t happen without pictures)😂

 

[BillChestnutt]

I didn’t want anyone to see my naked rearend.

 

[Sp99]

Not to get off subject have a stock 16 p1k 3 seater
Trying to order front lower arm there are two options “aarm or type 1 aarm” what’s the diffence I’ve read all over and any help would be greatful. Thank you

 

[BillChestnutt]

What manufacturer are you trying to order from? I went with Texas Tough Customs . They offer an arched A arms with no lift and some with 3 or 6 inch lifts. I am really pleased with them. They aren’t the least expensive but I believe they’re worth the extra money.

 

[BillChestnutt]

Now that I’ve had my TTC A arms on and put them to the test last weekend on a 228 mile ride. I can say I’m extremely pleased with them. I can now get rid of my stock A arms, so if anyone in Arizona needs stockers for a repair or replacing a bent one let me know. The price is right ( Free Dollars) !!!

 

[Shelly]

Now that I’ve had my TTC A arms on and put them to the test last weekend on a 228 mile ride. I can say I’m extremely pleased with them. I can now get rid of my stock A arms, so if anyone in Arizona needs stockers for a repair or replacing a bent one let me know. The price is right ( Free Dollars) !!

Which did you go with the 0,3 or 6? Did you have to change anything else besides the A arms?

 

[Shelly]

Which did you go with the 0,3 or 6? Did you have to change anything else besides the A arms?

Sorry I see I missed it above. But still want to know did you have to change anything else besides the a-arms and shocks?