P500 New 520 Has Arrived! Help with Rear Wheel Well Liners

[NeHunter13]

Hey guys!

Finally got my hands on a 520. I heard I needed to post pictures or it didn't happen, so here you go!

While I have your attention, is there a good solution for rear wheel well liners to keep the crap out from under the seat area? Or have people had to fabricate their own liners?

Thanks!

 

[Admin]

 

[futzin]

Woot woot! Congrats from KY . . .

 

[gullyjumper]

Looks sharp !

 

[pappyo]

Congrats & welcome from central upstate N.Y

Some nice people & information on the Honda Forum's

RED Was the 1st. Color all other colors followed Honda hopes they sell. & they do.
2022 520 in Gray.

Your on your own blocking inner fender UNDER SEAT AREA.

Included a picture of how I did the P500 left side under seat area ( With truck tailgate liner ).

Intend to do simular to the P520 & the area above the rear tire ( cavity in dump box ) to prevent mud or snow build up.

For Under seat & Behind the Seat upper area--"Trigger" -- sells a rubber shield. Helps with ( heat / dust & noise ) depending on what your going to be using the machine for his shield maybe alll need.you

 

[HiFive]

Welcome from west central FL. Nice ride!

 

[BB3344]

Hey guys!

Finally got my hands on a 520. I heard I needed to post pictures or it didn't happen, so here you go!
View attachment 320095
View attachment 320096

While I have your attention, is there a good solution for rear wheel well liners to keep the crap out from under the seat area? Or have people had to fabricate their own liners?

Thanks!

I bought some 10inch wide rubber and used honda push pins to attach it to the fenders and zip-tied the inner part to the bed frame. loosened the tie-downs in the bed and zip tie between the bed and rails. I am not crazy about how it looks but will sure keep lots of mud out of there.

 

[DaddyDubbs]

Welcome from Alabama.

 

[KyGal83]

Welcome from Kentucky! Congrats! Love the Moose Brown, same color as my 500 and the best color in my opinion! Enjoy.

 

[SteveW]

Congrats, I am jealous I am still waiting on the one I ordered.

 

[Jdh3]

I fabricated my own using a heat gun and material from a black plastic storage box.