Mounts

[chops450]

Who makes mirror/light bar mounts that actually fit on these bars. I've already ordered two different kits that don't fit. I have the 1000-5. Any help is much appreciated! Thanks in advance

 

[Admin]

 

[Remington]

Welcome from the the same State your from !👌
Where bouts you from? I live in the Stockbridge area. I ride mostly at my cabin in the Gaylord area.

these are the clamps I’ve used on all my lights
Nilight 90020B 2-Pack (Standard) Mounting Bracket Kit LED Off-Road Light Horizontal Bar Tube Clamp Roof Roll Cage Holder,2 Years Warranty https://www.amazon.com/dp/B0714CYKBJ/?tag=sxsweb24-20

 

[Remington]

Here’s a close up that I could get for your. The rubber grommets are used for multiple ROPS and work will all the dimensions of the pioneer

 

[CMB]

Axiaalloys.com

 

[renosxs]

Just bought 4 of these below and will install this weekend for some rear lights. Will post any issues but expect none due to the grommets. I believe many ROPS are 1.75' while the Honda is 1.78" Never measured both but have seen this while researching spare tire mounts. Please post corrections if found.

these are the clamps I’ve used on all my lights
Nilight 90020B 2-Pack (Standard) Mounting Bracket Kit LED Off-Road Light Horizontal Bar Tube Clamp Roof Roll Cage Holder,2 Years Warranty https://www.amazon.com/dp/B0714CYKBJ/?tag=sxsweb24-20
[/QUOTE]

 

[chops450]

Welcome from the the same State your from !👌
Where bouts you from? I live in the Stockbridge area. I ride mostly at my cabin in the Gaylord area.

these are the clamps I’ve used on all my lights
Nilight 90020B 2-Pack (Standard) Mounting Bracket Kit LED Off-Road Light Horizontal Bar Tube Clamp Roof Roll Cage Holder,2 Years Warranty https://www.amazon.com/dp/B0714CYKBJ/?tag=sxsweb24-20

I live in Fowlerville, do most of my riding in St. Helen or out at the sand dunes.

 

[chops450]

I purchased same amazon kit you both posted. I am trying to mount to the front top roll bar and those clamps don't seem to fit no matter what combination of rubber grommets I use. I will check again when I get home tonight.

 

[chops450]

Axiaalloys.com

Thank you! I will check these out as well!

 

[Remington]

I purchased same amazon kit you both posted. I am trying to mount to the front top roll bar and those clamps don't seem to fit no matter what combination of rubber grommets I use. I will check again when I get home tonight.

They do work well. But to get the clamps to make a secure fit, they go on very tight and the rubber when putting it on will make it few like it’s too small. That’s what u want tho!

If your still having issues, post some pics as to how it looks so we can help

 

[chops450]

This is the set I bought... Everything looks the same except it is a four piece set...

Amazon.com: Nilight 4PCS Mounting Bracket Kit LED Off-Road Light Horizontal Bar Tube Clamp Roof Roll Cage Holder,2 Years Warranty: Automotive

Buy Nilight 4PCS Mounting Bracket Kit LED Off-Road Light Horizontal Bar Tube Clamp Roof Roll Cage Holder, 2 Years Warranty: Light Bars - Amazon.com ✓ FREE DELIVERY possible on eligible purchases

www.amazon.com

 

[chops450]

Are you running no rubbers on top roll bar? This is with the skinniest rubbers in. Maybe two threads in bottom bolt.

 

[chops450]

Got it with these... Hard to do by yourself lol. Thanks for the help fellas!

 

[chops450]

Looks something like this

 

[Remington]

There you go! There a bit of a bugger but you’ll be glad they go on tight when the machine is herky jerkying around on the trail.
Just get the bolts started a few threads at a time and turn the bolts a few revolutions each back and forth so there even to get a good tight fit

 

[renosxs]

Just bought 4 of these below and will install this weekend for some rear lights. Will post any issues but expect none due to the grommets. I believe many ROPS are 1.75' while the Honda is 1.78" Never measured both but have seen this while researching spare tire mounts. Please post corrections if found.

these are the clamps I’ve used on all my lights
Nilight 90020B 2-Pack (Standard) Mounting Bracket Kit LED Off-Road Light Horizontal Bar Tube Clamp Roof Roll Cage Holder,2 Years Warranty https://www.amazon.com/dp/B0714CYKBJ/?tag=sxsweb24-20

[/QUOTE]
I installed these and found the rubber fillers for 1.75 were too large. I took a dreamer and sanded the inner ridges down a bit to make them fit. I also used a clamp th get the two sides close enough to enable the screw threads. If the clamps fall off I’m sure they will need to collect my boday as they are very secure. Mounting on the top back pipe they do touch the roof so find the least amount of roofline to install. You can see that in the pictures.