Mounting Off road led lights.

[madmax]

Folks, looking fir good ways to mount a rear backup led light and looking at mounting to the hatd plastic roof area that is tapered down in the back. Looks plenty sturdy, and out if the way from raising the bed or debris underneath. Has anybody done this? Looking at a small 4-6" light. Also looked at the front and it seems one could mount a 12-15" led light on the roof part there. Any one done that?. I see pros, but any cons I'm not looking at? Thanks!

 

[Admin]

 

[Rayger143]

Plug-n-play Auto Backup Light High Mount Kit for Honda Pioneer 1000 / 700

A simple and easy solution to install a backup light. This is a simple and easy solution for installing an auto backup light. It is fully plug-n-play, drop-in ready. The kit does not require any wiring, cutting or splicing of the factory wires. Simply clamp the preinstalled light, feed the...

store.hondasxs.com

Add-A-Light!, High Beam LED Light Bar for Honda Pioneer 1000.

The simplest way to add a light bar to your Honda Pioneer 1000. ***Attention 2022+ owners*** We now have a light bar bracket that works for the 2022+ units. See images labeled "FAIRLEAD MOUNT". This fairlead mount positions the light bar just above the winch. When you choose this option, it...

store.hondasxs.com

 

[Adam490]

The auto-reverse lights from the club store mentioned above are great. I run an amber chase light in the roof section you're talking about:

 

[Gohonda2]

Cons for me would be tree limbs catching and knocking the lights off if mounted to the top of the plastic roof. I see a lot of people doing it but it’s not for me.

 

[Hillbillytnt]

Folks, looking fir good ways to mount a rear backup led light and looking at mounting to the hatd plastic roof area that is tapered down in the back. Looks plenty sturdy, and out if the way from raising the bed or debris underneath. Has anybody done this? Looking at a small 4-6" light. Also looked at the front and it seems one could mount a 12-15" led light on the roof part there. Any one done that?. I see pros, but any cons I'm not looking at? Thanks!

3 or 5 seater I’m running 2 4” side shooter pods on the roof of a 3 seater. They are high and dry and stay clean but they leave a bit of a shadow because of the angle. I used one bolt each from the roof mounts but that does limit adjustment. It’s a solid enough mount for two small lights. I would think anything to heavy mounted on the front may bounce a little at higher speeds but I could be wrong. I highly recommend the reverse light harness from the club store it is worth it.

 

[madmax]

Thanks all. I should have clarified a bit. Will be mounting on the sloping side of the plastic roof. Front and back i think now after seeing some pics. I will also look at weight for the light. as you said, it might bounce a little. Also i did look into the backup harness, but i would like the option of turning on the rear light with a switch, so i dont have to have the machine in reverse or running. I have switches, so it all looks doable. Thanks! it is a pioneer 5 with full camo enclosure.

 

[donia]

You could put a 1/4" to 1/2" flat plastic backer, or thinner metal backer, across the inside of the roof slope to keep flex to a minimum...if you're set on the slope for mounting points.
..and the Club Store sells an inline plug and play switch for the back-up light to make it a manual switch.

 

[madmax]

just now looked at the club store stuff. didnt even know it existed. Thanks. lots of good stuff ill look at.

 

[Rayger143]

just now looked at the club store stuff. didnt even know it existed. Thanks. lots of good stuff ill look at.

He will hook you up with what you want

 

[Hillbillytnt]

just now looked at the club store stuff. didnt even know it existed. Thanks. lots of good stuff ill look at.

Buy with confidence. It’s all quality stuff. The reverse/work light trigger harness will do what you want. I just installed mine last month. He even helped my by having the power supply wires for the lights come out under the hood. Great people to deal with.

 

[madmax]

Folks,
Thanks for all the help. Does anybody know where i can buy the Molex connectors that would connect to the factory auxiliary wiring harness at? This is for the relay box that came with the aux wiring kit. I have all the wires, and lights to install just need those connectors. Looks to be 2 pin type. Are those available in the club store? I could not find them, but is there a contact i could call?
Thanks,

 

[Neohio]

Folks,
Thanks for all the help. Does anybody know where i can buy the Molex connectors that would connect to the factory auxiliary wiring harness at? This is for the relay box that came with the aux wiring kit. I have all the wires, and lights to install just need those connectors. Looks to be 2 pin type. Are those available in the club store? I could not find them, but is there a contact i could call?
Thanks,

Start a conversation with @Hondasxs he will help you with the plugs you desire.
They are on the store, but if you don't know what you are looking for, they are hard to find.

 

[madmax]

Thank you