Talon More info

[hondabob]

I really like all this Honda Happy Talk, more info here. I’m getting the X model.

https://utvactionmag.com/10-things-the-honda-talon-specs-dont-tell-you/amp/?fbclid=IwAR3VFQRcNymGx_KECOagdVSX8LPsMUiUhdYLM79DXpMKJexIGv0RrzGI5O4

 

[Admin]

 

[JACKAL]

I really like all this Honda Happy Talk, more info here. I’m getting the X model.

https://utvactionmag.com/10-things-the-honda-talon-specs-dont-tell-you/amp/?fbclid=IwAR3VFQRcNymGx_KECOagdVSX8LPsMUiUhdYLM79DXpMKJexIGv0RrzGI5O4

This was a good tidbit of information regarding the wheels and offsets. We get lots of questions on the P1K what is the OEM offset and they out the info right here:

"Both Talon’s use 15 inch wheels that are 6.5 inches wide in the front with a 50mm offset and 8 inches wide in the rear with a 33mm offset. The X wheels have a machined look while the Talon R has black wheels. They all have what Honda measures a 4/136 bolt pattern. We have checked with several wheel manufacturers which tell us, the 4/137 bolt pattern wheels they sell should work properly. Can-Am X3’s, Kawasaki Teryx’s use the 4/137 bolt pattern. Hondas Pioneer is listed as using a 4/136 also. The wheel stud holes on the stock Talon wheels are 14mm and the studs are 12mm"

I notice now that STI offers some new wheels (HD 9 & HD10 series) with 30mm & 50mm offset @ 7" wide. This should allow people to get setup and remain very close to factory widths.

 

[Smitty335]

This was a good tidbit of information regarding the wheels and offsets. We get lots of questions on the P1K what is the OEM offset and they out the info right here:

"Both Talon’s use 15 inch wheels that are 6.5 inches wide in the front with a 50mm offset and 8 inches wide in the rear with a 33mm offset. The X wheels have a machined look while the Talon R has black wheels. They all have what Honda measures a 4/136 bolt pattern. We have checked with several wheel manufacturers which tell us, the 4/137 bolt pattern wheels they sell should work properly. Can-Am X3’s, Kawasaki Teryx’s use the 4/137 bolt pattern. Hondas Pioneer is listed as using a 4/136 also. The wheel stud holes on the stock Talon wheels are 14mm and the studs are 12mm"

I notice now that STI offers some new wheels (HD 9 & HD10 series) with 30mm & 50mm offset @ 7" wide. This should allow people to get setup and remain very close to factory widths.

This is going to be fun to watch (Talon Info) this year!

 

[alloutdoors]

I look forward to seeing both on the showroom floor this coming year...