P700 Measurement to the bottom of door

[Siyakadog]

Hello, I am looking at purchasing a Pioneer 700-4 and am wondering what the height is from ground to the bottom of door. I have a trailer with 13" sides, I am wondering if I would be able to get out after driving into trailer.
The closest one to me is an hour away so I can't take it myself
Thanks in advance

 

[Admin]

 

[Smitty335]

Hello, I am looking at purchasing a Pioneer 700-4 and am wondering what the height is from ground to the bottom of door. I have a trailer with 13" sides, I am wondering if I would be able to get out after driving into trailer.
The closest one to me is an hour away so I can't take it myself
Thanks in advance

Huh?

 

[Siyakadog]

Huh?

My trailer is 72" wide and has. 13" solid sides. Wasn't sure if the front doors would clear the 13" side of the trailer so I can get out.

 

[Smitty335]

My trailer is 72" wide and has. 13" solid sides. Wasn't sure if the front doors would clear the 13" side of the trailer so I can get out.

72" wide, inside or outside? 13" sides?

 

[Siyakadog]

its 72" in-between the solid sides

 

[Smitty335]

View attachment 234076its 72" in-between the solid sides

Should fit, may be stepping over the doors of the. P7 to get out

 

[Alan_Vander]

Should be fine i have a 77" with 14 inch sude rail just pull ut on close to the other side the rear of the door is angled upward a little when you open

Sent from my moto z4 using Tapatalk

 

[lowrider]

Since we're on the trailer size topic...I'm in line to get a 700-2 Custom in the spring 2021. I have three flat bed trailers...one is 54" inside the 3" high side and the other one I might use is 96" wide and no problem but it's 16' long and a bit too big for the little Pioneer 700 and not tight road friendly. 3rd is way too big.
I'm planning to change tire/wheels from stock to 14"x 6" and run truck tires. I know the outside measurement of the tires is unknown at this point. I can widen the little trailer a few inches before the wheel wells become a problem.

Any ideas on how wide this combo might be on outside of tires? Really don't want to build another trailer.

 

[Alan_Vander]

Since we're on the trailer size topic...I'm in line to get a 700-2 Custom in the spring 2021. I have three flat bed trailers...one is 54" inside the 3" high side and the other one I might use is 96" wide and no problem but it's 16' long and a bit too big for the little Pioneer 700 and not tight road friendly. 3rd is way too big.
I'm planning to change tire/wheels from stock to 14"x 6" and run truck tires. I know the outside measurement of the tires is unknown at this point. I can widen the little trailer a few inches before the wheel wells become a problem.

Any ideas on how wide this combo might be on outside of tires? Really don't want to build another trailer.

Not particularly sure on the width but that 56 inch wont be big enough. I haul mine on a 77" inside rail 16 foot dual axle. Gives you room to put it on the trailer and tongue weight right. And a spot for certain fourwheelers to fit no problem. Granted i got the trailer before i put portals on but i can haul a single cab pick up on the 77 inch. Not sure if your 96 outside to outside or not but thats sounds similar to mines total width.

Sent from my moto z4 using Tapatalk

 

[Bigseff23]

I think the rails on mine are 12" and I've got 4 or 5 inches to spare on 27s with no lift

 

[CID]

Hello, I am looking at purchasing a Pioneer 700-4 and am wondering what the height is from ground to the bottom of door. I have a trailer with 13" sides, I am wondering if I would be able to get out after driving into trailer.
The closest one to me is an hour away so I can't take it myself
Thanks in advance

Surely someone has a 700 they can open the door and measure to the ground to answer the man's question?

 

[Smitty335]

Surely someone has a 700 they can open the door and measure to the ground to answer the man's question?

Not me!

 

[Bigseff23]

I measured 15.5 inches. But I'm on 27s

 

[Mudwing]

Surely someone has a 700 they can open the door and measure to the ground to answer the man's question?

Sir, yes sir. 😎 I have a ‘17 7hundo-4 on stock tires. 10 psi rear. 8 psi front. 😉 This is a pic of the driver front door.

 

[JimmyA]

My 700/4 with 27's, the bottom of the front door when opened is 15.5" from the ground! With factory 25"s it may not clear the 13" side walls of the trailer?

 

[Mudwing]

My 700/4 with 27's, the bottom of the front door when opened is 15.5" from the ground! With factory 25"s it may not clear the 13" side walls of the trailer?

I think I snuck my post in right before yours. I just measured mine at 14 1/4” with factory tires. 😉

 

[JimmyA]

I think I snuck my post in right before yours. I just measured mine at 14 1/4” with factory tires. 😉

If you don't mind, why are you still running with that size? Just curious!

 

[Mudwing]

If you don't mind, why are you still running with that size? Just curious!

Getting my money out of them. The stockers have a great V tread pattern for mud. They haven’t given me any problems with 1800 miles on them. Why fix what ain’t broke?🤣😎

 

[JimmyA]

Getting my money out of them. The stockers have a great V tread pattern for mud. They haven’t given me any problems with 1800 miles on them. Why fix what ain’t broke?🤣😎

I totally agree, just curious!

 

[Grounhog]

Hello, I am looking at purchasing a Pioneer 700-4 and am wondering what the height is from ground to the bottom of door. I have a trailer with 13" sides, I am wondering if I would be able to get out after driving into trailer.
The closest one to me is an hour away so I can't take it myself
Thanks in advance

I think you will be close, I have 27' tires on mine and about a 1" lift and clear a 16" trailer rail. sitting in it takes out about 1" as well. sorry I don't have my original numbers for you. also remember adding a 2x8 board to the floor where the wheels sit will help in a pinch if needed. just be sure to fasten them down good.