P1000 Lighting in general

[FatMan138]

Howdy y'all! I'm new here! My pioneer 1000-5 is on order not to sure of the delivery date as of yet! Maybe some time next month! Can't wait!! Super stoked!! Anyways! I got 5
2.5" led lights I'm looking to mount as a possessed to light bars! Just looking for some ideas here! I was thinking 2 on roof on 45d and maybe 2 on factory bumper set to headlight direction and a single in the rear for a revers light! Anyone else have a similar set up they cared to share!! Please and thank you!

 

[Admin]

 

[ghost]

Personally I wouldn't put any on the roof - it increases the overall height clearance and mine would get knocked alot by branches.

I have a curved lightbar at the bottom of the windshield and 2 work lights on the back that also turn on in reverse. The stock headlights are ok for distance but don't light much of the peripheral area so you cant see where you are turning.

With 5 lights, I would put 2 on the back as work lights / reverse, and 2 on the corners of the hood next to the windshield facing at about 45 degree angle and one centred on the bumper. Or possibly all 3 on the bumper - one facing forward and two at angles.

 

[tig]

If I had 5 to work with I'd put 1 on each A pillar just below the roofline or maybe under the front edge of the roof then 2 on the rear. Keep the 5th as a spare in case 1 gets busted or starts foggin up.

 

[joeymt33]

Howdy y'all! I'm new here! My pioneer 1000-5 is on order not to sure of the delivery date as of yet! Maybe some time next month! Can't wait!! Super stoked!! Anyways! I got 5
2.5" led lights I'm looking to mount as a possessed to light bars! Just looking for some ideas here! I was thinking 2 on roof on 45d and maybe 2 on factory bumper set to headlight direction and a single in the rear for a revers light! Anyone else have a similar set up they cared to share!! Please and thank you!

Here's an idea for four locations.…