I have honda tip outDepending on the windshield you have - tip out, or standard you can use bar clamps and just notch out the windshield and mount the bar. Other squeeze them under the lip of the roof and use a support to keep it secure.
Is there a light bar install that will work with a full windshield?
No not off hand, they are the set that comes with the light bar (Hardware set for P500). I will try and snap some tomorrow when I get home from work. Below is a detail of the light and hardware, clamps on the right with standoffs on the left, standoffs bolt to clamp with (1) 8mm bolt each side which I drilled a pass through hole in the plastic roof to connect the two.Do you have a pic of the light at mount from inside Jacal ?
What type of brackets did you use for those?I never installed one on the tip out (Standard is pretty easy).
The tip out does limit options as it has to move. Maybe make a bracket to attach to the roll bar mount on the hood and kick it out far enough for the windshield to clear - the draw back will be it will block the hood access possibly depending on the height. I personally went with LED cubes mounted to the roll bar mount and it allows full access to my hood and plenty of light for the woods at night.View attachment 6283