Tuco69
Well-Known Member
Lifetime Member
Suggestions on rear mounting two cubes, have Honda roof and hard rear panel? Even using small plates and mounting them on the roof or rear panel I’m a little nervous about mounting to plastic.
Ohio4x4
I brought the dishwasher
Lifetime Member
I used the bolt for the mount to the rear rops it's very sturdy and so far I haven't knocked them around on anything.
Tuco69
Well-Known Member
Lifetime Member
Will try that. Hoped to get more light directed to the rear.
Ohio4x4
I brought the dishwasher
Lifetime Member
It's hard to see in the pic but I used the elcheapo Amazon side sooter led cubes they work well to cast light all the way around the machine. I also used them on the front at a similar angle under the windshield.
Remington
Fife! POIDH Enforcement Officer
Lifetime Member
Supporting Member
This is where I put mine. It also works with a rear panel (I don’t have a pic) @joeymt33 had a pic but may have changed his up. Zoom in on the clamps. There from Amazon. I can get u a link if u want.
Remington
Fife! POIDH Enforcement Officer
Lifetime Member
Supporting Member
Here’s the clamps
Sammanlight 1.75'' Tube Clamps Mounting Brackets Adjustable Roll Cage Bull Bar Clip Holder Kit Universal LED Light Bar Mounts for Offroad Truck ATV SUV Jeep, 2pcs https://www.amazon.com/dp/B07GX987F4/?tag=sxsweb24-20
Sammanlight 1.75'' Tube Clamps Mounting Brackets Adjustable Roll Cage Bull Bar Clip Holder Kit Universal LED Light Bar Mounts for Offroad Truck ATV SUV Jeep, 2pcs https://www.amazon.com/dp/B07GX987F4/?tag=sxsweb24-20
Tuco69
Well-Known Member
Lifetime Member
Remington
Fife! POIDH Enforcement Officer
Lifetime Member
Supporting Member
joeymt33
i4WD=imitated 4WD
Moderator
Lifetime Member
Supporting Member
Club Contributor
This is my current set up, works great with the Honda bumper.
Took a while to find a pic. This is the previous set up which worked well
