having problem sliding it back in because the cylinder isnt all the way in?
Sent from my moto z3 using Tapatalk
it does. but i think its a little different. i did mine with pry bar and wrench. i turned the piece by hand but was only 1 turn out. probably cause i fried the ebc brake in like 100 milesDoes the 700 have the pinion brake like the 500? If so, the piston probably screws in like the 500. It cant be pushed in with a c clamp like most calipers.
Here is a video, skip to about 14:45
Good info, thanks!Does the 700 have the pinion brake like the 500? If so, the piston probably screws in like the 500. It cant be pushed in with a c clamp like most calipers.
Here is a video, skip to about 14:45