Talon Idle speed

[spentcoins]

Do you have to have a programmer/tech computer to lower the idle speed on the Talon's? I really think if I lower the idle speed the transmission will be more apt to mesh into low gear better.

 

[Admin]

 

[hondabob]

The clutches are open below about 1,800 so I don't think a lower idle speed will help.

 

[spentcoins]

The clutches are open below about 1,800 so I don't think a lower idle speed will help.

Maybe not, I've got a lot to learn about the mechanical inner workings of this transmission. I will start the year down next week.

 

[1HasBeen]

If the idle speed is fast enough to be dragging engagement, then you would get gear clash when moving the shifter. That is not the symptom I have seen described.

 

[PaulF]

Do you have to have a programmer/tech computer to lower the idle speed on the Talon's? I really think if I lower the idle speed the transmission will be more apt to mesh into low gear better.

DynoJet PowerVision 3 will do it but it doesn't help. I already tried so save your money unless you want the PV3 to do some custom tuning.

 

[spentcoins]

DynoJet PowerVision 3 will do it but it doesn't help. I already tried so save your money unless you want the PV3 to do some custom tuning.

Thanks, that's the info I was looking for.