J
Bought a new 700-4 Deluxe and put soft enclosure with roof and windshield. Have heater and works pretty well. However, there is a ton of air coming through the dash around the drive selector and 4wd selector. Anyone found a solution for that?
BadMechanic
Well-Known Member
Could try cutting out foam to fit in the spots.
Sent from my SM-A326U using Tapatalk
Sent from my SM-A326U using Tapatalk
Buggyman
Well-Known Member
Lifetime Member
Supporting Member
good luck finding anything that last. someone a while back got a small shifter boot from a pull a part type place that looked like it might work.
Last edited:
Mopower58
CST is the Best!
Lifetime Member
Supporting Member
I'm not sure if he makes them for a 700, but Rad Customs makes a plate with a rubber flap that fits tightly around the shifters on a P1K. They install with screws, all you have to do is remove the shifter knobs. The shift letters are powdercoated in a variety of colors.
Red500
Well-Known Member
Lifetime Member
Supporting Member
Mopower58
CST is the Best!
Lifetime Member
Supporting Member
Home | Rad Customs, LLC This is the website, it's a part time job for him as he has a regular job. I talked to him personally and he had a P1K at that time.
J
He currently doesn’t have any availability. Hoping after the first of the year. Thanks!
Mopower58
CST is the Best!
Lifetime Member
Supporting Member
You are welcome,first of the year is Sunday! 😜
Be nice if someone could come up with a nice plate. I towel a towel over mine and the emergency brake.
advertisement
nothing is sealed from the outside elements within the dash or floorboard area of the 700. It will take alot of sealing up to keep it secure.
