Honda talon 1000x-4 cab enclosure

[Gregjones26]

I have a 1000x-4 talon and I’m looking for a cab enclosure for these colder months. What is everyone’s thoughts and opinions on the cab enclosures that are available for 1000x-4? Thanks!

 

[Admin]

 

[Red500]

Can't help with your questions but:
Welcome to the club from East Tennessee.

 

[Smittyp]

I have the talon r with the Honda upper doors they are pricey but nice.
welcome from Tennessee
@Remington

 

[Remington]

I have a 1000x-4 talon

Welcome from the Once great state of Michigan!
And congrats on your first ever post since joining a yr ago!
Then u prob know we like pics or your rig! Thats the first forum vrs…
Pics Or It Didnt Happen!

also try CEC enclosures

 

[denniswestfall]

I've got an 1000x-4 and live in upstate NY. I've got the honda glass windshield and the plastic rear. I think if you go with upper doors, you will also want a heater to keep it from fogging. I installed an inferno heater and seat heater elements from amazon. I don't do a ton of riding in the winter, but with my combo, I stay pretty warm with just my snowmobile jacket and winter hat. I didn't buy the upper doors because I was afraid they would fog over, or get snow stuck to them obstructing by view.

Once we get over a foot of snow, the talon usually stays parked and the sleds come out except for the occasional road riding or ice racing.

Sent from my SM-G996U using Tapatalk

 

[Gregjones26]

I've got an 1000x-4 and live in upstate NY. I've got the honda glass windshield and the plastic rear. I think if you go with upper doors, you will also want a heater to keep it from fogging. I installed an inferno heater and seat heater elements from amazon. I don't do a ton of riding in the winter, but with my combo, I stay pretty warm with just my snowmobile jacket and winter hat. I didn't buy the upper doors because I was afraid they would fog over, or get snow stuck to them obstructing by view.

Once we get over a foot of snow, the talon usually stays parked and the sleds come out except for the occasional road riding or ice racing.

Sent from my SM-G996U using Tapatalk

I appreciate the response. I live in northwest PA, about 1.5 hours south of the NY border, so we don’t get a ton of consistent snow, just a lot of those bitter cold days. I have a glass windshield and a poly rear window, and I’m also planning on the inferno heater. I’ve seen the heated seat kits on Amazon, were they a pain to install? Are you running the extended inferno heat kit too, to give 2 extra vents on the x4?

 

[Gregjones26]

Welcome from the Once great state of Michigan!
And congrats on your first ever post since joining a yr ago!
Then u prob know we like pics or your rig! Thats the first forum vrs…
Pics Or It Didnt Happen!

also try CEC enclosures

Thanks for the reply! I’ll get some pictures posted in a bit… I’ll check out CEC. Thanks

 

[Gregjones26]

I have the talon r with the Honda upper doors they are pricey but nice.
welcome from Tennessee
@Remington

Do you have any problems with water leaking in? I’ve heard that the oem Honda uppers don’t seal well. Thanks

 

[Remington]

Do you have any problems with water leaking in? I’ve heard that the oem Honda uppers don’t seal well. Thanks

The old originals where $hit!
the new currant design is better

 

[Smittyp]

Do you have any problems with water leaking in? I’ve heard that the oem Honda uppers don’t seal well. Thanks

The only water I had to come in was at the front of the roof at that little gutter. but there’s a lot of fixes for that. Other than that they’ve worked great for me. The wife really likes them and she told me that’s all that counts😂

 

[Buggyman]

I have a 1000x-4 talon and I’m looking for a cab enclosure for these colder months. What is everyone’s thoughts and opinions on the cab enclosures that are available for 1000x-4? Thanks!

welcome from Ohio

 

[Gregjones26]

The old originals where $hit!
the new currant design is better

Ok thanks. I heard seizmick are the ones designing the oem uppers. Do you know if this is true or not? My cousin has seizmick uppers on his general and they’re great quality.

 

[Gregjones26]

The only water I had to come in was at the front of the roof at that little gutter. but there’s a lot of fixes for that. Other than that they’ve worked great for me. The wife really likes them and she told me that’s all that counts😂

Ok cool. Thanks! I’m also trying to appease my wife, hence my due diligence 😂

 

[Teebow]

Cec enclosures. priced well and quality

 

[Remington]

Ok thanks. I heard seizmick are the ones designing the oem uppers. Do you know if this is true or not? My cousin has seizmick uppers on his general and they’re great quality.

Never heard that. I think Honda signature is very tight lipped about who makes there $hit.
You would hear it here from the boss first if that was the case.

Ok cool. Thanks! I’m also trying to appease my wife, hence my due diligence 😂

As I always say…
Happy Wife Happy Life!

 

[Remington]

CEC enclosures on my Talon

 

[denniswestfall]

I appreciate the response. I live in northwest PA, about 1.5 hours south of the NY border, so we don’t get a ton of consistent snow, just a lot of those bitter cold days. I have a glass windshield and a poly rear window, and I’m also planning on the inferno heater. I’ve seen the heated seat kits on Amazon, were they a pain to install? Are you running the extended inferno heat kit too, to give 2 extra vents on the x4?

I don't have the extended heater. Just two vents pointing towards windshield and two down by the floor. The heated seat elements were easy to install, just time consuming. There is a million staples holding the seat covers on. You need a decent electric stapler to put the cover back on. I only put them on the seat bottoms not the backs
The heating elements I bought have a high and a low setting and work well. There's a connector so I can unplug them to remove the seat base. I've had them in over two years and they still work even after pressure washing the machine multiple times.

Sent from my SM-G996U using Tapatalk

 

[Vondy]

I have one of these that I won at a raffle. Side X Side Enclosures Utv Cab Enclosures for Yamaha Polaris Kawasaki It is still in the box though since I don't ride in cold weather. I am not real thrilled about sticking the velcro on the machine. I really like the Tusk with magnets, but they only make them for the 2 seater.

 

[Plumber32]

I have one of these that I won at a raffle. Side X Side Enclosures Utv Cab Enclosures for Yamaha Polaris Kawasaki It is still in the box though since I don't ride in cold weather. I am not real thrilled about sticking the velcro on the machine. I really like the Tusk with magnets, but they only make them for the 2 seater.

Yeah I bought the super atv kit but yet to install.

 

[Gregjones26]

Never heard that. I think Honda signature is very tight lipped about who makes there $hit.
You would hear it here from the boss first if that was the case.

As I always say…
Happy Wife Happy Life!

Haha, Yes very true!