P500 Honda Pioneer 500 -Clutch Spring Kit!!!!!

[jak9922]

i wanted to wait until i had it installed but im excited!!!!!!! have clutch springs coming that SHOULD!!! give 500rpm stall this will get the tires ripping on take off and will absolutely help the guys with the big mudder tires

 

[Admin]

 

[Hondasxs]

Wooo hooo.

 

[Dp5hunter]

Where did you find this spring kit and how hard will it be to install, how much did it cost.

 

[jak9922]

Where did you find this spring kit and how hard will it be to install, how much did it cost.

lot of research hopefully its right lol and will have to pull the front cover off the motor lol hopefully it pays off

 

[jak9922]

springs were 70$ i dont know how much is involved time wise yet lol

 

[jak9922]

but this means i wont be taking any new orders next week lol ill be working on my ride

 

[Dp5hunter]

springs were 70$ i dont know how much is involved time wise yet lol

Well this is still great news if I can make my little Avenger stronger at lower RPM's.

 

[jak9922]

Well this is still great news if I can make my little Avenger stronger at lower RPM's.

it will actually raise the rpms the buggy takes off so you will have more power when the tires start moving

 

[pFive]

IS this the one you are using? Outlaw Clutch Kit for Honda Foreman 500 (See Apps)

 

[jak9922]

IS this the one you are using? Outlaw Clutch Kit for Honda Foreman 500 (See Apps)

similar but epi

 

[jak9922]

should be here tomorrow so hopefully this weekend i can have them installed and tested

 

[pFive]

Cool, cant wait for your review!

 

[Dp5hunter]

Same here can't wait for the update of its performance.

 

[jak9922]

hopefully its a positive one lol

 

[jak9922]

well today i managed to strip the p5 down ( inside / skid plate / front dif so i could pull the front drive shaft/ drained coolent and oil) tomorrow ill pull the case cover and hopefully finish btw i 100% need a new skid plate

 

[Dp5hunter]

@jak9922 what skid plate do you have now?

 

[jak9922]

@jak9922 what skid plate do you have now?

factory lmao

 

[jak9922]

ok removed shift motor e brake cable and clutch cover now onto the springs TALK ABOUT AND ENTIRELY NEW LEVEL OF FRUSTRATION!!!!!! i just made up a completely new vocabulary of swear words

 

[jak9922]

im going to rank this 7-8 out 10 on difficult scale because of location

 

[jak9922]

well good news and bad new!!!!! good news is she ripps and i would guess 300-500rpm stall bad new is i pinched my output shaft seal and have to take it all apart again