Honda pioneer 1000 code 24

[Hondaboy6]

I got a 2016 Honda pioneer 1000 I went through some deep water back around thanksgiving and it ran fine. I got home and the oil light came on and shut off. I turned the key off and started it back it up and it was fine. The past few months it would do that off and on. Now every time you crank it the oil light comes on and throws code 24. When you put it in gear it will shut down. If you try cranking it in gear all it does is turn over. It will crank in park and neutral. Any ideas?

 

[Admin]

 

[Remington]

When u swamped it, did you change all the fluids?
and did you dry out all the molex connectors especially the ones to the injectors.
you can download the manual in the recourses on this site that will have those codes, If u become a life/suporting member.

 

[Mark in Northern Iowa]

The search bar works well again.
"1000 in gear shut down" brings many threads
.
"1000 code 24" shows a few threads
.
Being a 2016, be sure to read about the shift control motor.
.
Have a good day

 

[Remington]

Being a 2016, be sure to read about the shift control motor.

And since your in there for this ☝️
Have you had the clutch update on that 16’? Might be unrelated, but is known to cause a thing or two cuz its seen a thing or two

 

[Hondaboy6]

So I ended up ordering a shift motor I haven’t put it on yet but I did unplug the old one and plug the new in and started the engine and it went into gear so I think that’s going to be the issue