P700 Home made front hitch and shackle

[B128462]

Grabbed a few scrap pieces of steel and made a home made front hitch and d ring shackle for the p700.
The KFI winch came with a generic mount so I out it to use. Welded a piece of 2inch square tube with 1 1/2 inner dia. Drilled a few holes, welded a d ring , few coats of primer and rattle can black and silver.
Mounted the base to the existing KFI mount holes and DONE! Got myself a nice simple front end hitch and d ring shackle. Perfect for tiring down the p700 and makes a nice point for yanking from the front without interfering with the winch... Good Saturday project

 

[Admin]

 

[Hondasxs]

Great job. That should work great as a fairly solid point.
Did you have any ideas for the rear? I have trouble finding a place to pull people out.
A shackle would be great back there.

 

[B128462]

Great job. That should work great as a fairly solid point.
Did you have any ideas for the rear? I have trouble finding a place to pull people out.
A shackle would be great back there.

Actually all I use for the rest is a store bought hook point/shackle that I bought at Walmart. I haven't put it to the test yet but I'm guessing it should be fine... Take a look...

 

[Vato]

That front D-ring mount is a good idea.