Remington
Fife! POIDH Enforcement Officer
Lifetime Member
Supporting Member
Fixed it for your viewing pleasure.
Last edited:
L
LarryAmboy
Well-Known Member
GovtMule
NTC’s SoA, Chief Sarcasm Officer-Self Appointed
Lifetime Member
Old guys will tell you back in their day they lost the 3/8 😉🙄🤣🤣🤣
That's real old. Like when the Dead Sea was just sick old.
JayPo
Somewhat Well-Known Member
Lifetime Member
advertisement
Don’t minimize our experiences. The pain is real.
P1K5Dave
Well-Known Member
Lifetime Member
Club Contributor
Speaking of - this is a nice set to have. All 10s
GEARWRENCH 10 Pc. 1/4" & 3/8" Drive 6 Pt. Single Size Socket Set, 10mm - 80319 https://www.amazon.com/dp/B00LH7DM14?tag=sxsweb24-20
GEARWRENCH 10 Pc. 1/4" & 3/8" Drive 6 Pt. Single Size Socket Set, 10mm - 80319 https://www.amazon.com/dp/B00LH7DM14?tag=sxsweb24-20
The Gearwrench stuff looks nice but sure isn't cheap.
Any experience with that tool brand?
The only GearWrench stuff I have is the stubby combination wrench set. I guess at some point I bought an extra 10mm, because there are two in my picture above. They work real well, but to change the ratcheting direction you flip the wrench over. My other set of ratcheting wrenches I have is full size combination wrenches by Craftsman. They have a lever to flip to change direction, and they SUCK! The lever changes itself for no apparent reason. There you are, happily loosening a fastener, and next thing you know it’s tightening back down.
That Craftsman flex head in the picture works well, too. The head locks at different angles both sides of center. It’s a one way ratchet, so you have to flip the wrench over to change direction
That Craftsman flex head in the picture works well, too. The head locks at different angles both sides of center. It’s a one way ratchet, so you have to flip the wrench over to change direction
The fact that an exclusively 10mm set is sold is PROOF that 10mm tools have a supernatural ability to disappear.
I don’t know why I have so many. All I know is I read you guys’ complaints about missing 10mm tools, and poof! I have one more.
Neohio
Beast of the East
Lifetime Member
Supporting Member
Club Contributor
Here is an older family photo.
I am sure it has expanded. I didn't add wrenches to the mix in this pic.
I am sure it has expanded. I didn't add wrenches to the mix in this pic.
Is that a 1/2” drive impact on the left?
I see stripped threads in your future.
I see stripped threads in your future.
Neohio
Beast of the East
Lifetime Member
Supporting Member
Club Contributor
YEP! Both on far left are 1/2 impact.
I know that pic is missing a bunch of sets.
I know I have another few 1/4 impacts in 10mm not pictured. Maybe I will spend a few minutes this weekend organizing all the 10mm in 1 family photo.
advertisement
