P1000 HELP - Replacing OEM wiper switch with a lighted switch.

[Hondasxs]

Hi,
I had an older guy contact me for help on replacing his OEM FACTORY wiper switch with a lighted one and I need your help as I haven't owned or touched a wiper system.

I saw the wiring diagrams for the DIY wiper system but I can't find any on replacing the factory switch.

He has the OEM system, wiper and switch setup for his Pioneer 1000 installed by the dealer.
I know we are going to have to re-pin the connector but in what order for what switch?

I do not have this unit in hand to check anything.
I will have some pics of the switch sent soon.
Until then, this is all the info I have.

Any help would be great.
Thanks.

 

[Admin]

 

[Alan_Vander]

on the switch if its the same design should be able to just plug it in. guessing its an 8 prong back but only 5 wires used. the switch have an led in it?

Sent from my moto z3 using Tapatalk

 

[Hondasxs]

on the switch if its the same design should be able to just plug it in. guessing its an 8 prong back but only 5 wires used. the switch have an led in it?

Sent from my moto z3 using Tapatalk

No, it's not lighted, thats what we are wanting to do.
It is just an on/off switch with 5 pins being used.

 

[Alan_Vander]

hmm thats weird usually the 8 prongs are lighted. unless it was wired for lighted but non lighted switch or its an on/off/on switch wired so it could run intermittent and constant with a on/off switch.

Sent from my moto z3 using Tapatalk

 

[Hondasxs]

More pics.
This is also the same for the 700. If anyone has replaced their switch please let me know.

confirm this is an ON/OFF switch.
Google wasn't much help looking up VD51

Anyone?

 

[Hondasxs]

More original pics.
Still no luck sourcing a switch.

- OTRATTW
- MOUSER
- DIGIKEY
- WAYTEK
- DELCITY
- ROCKERSWITCHPROS

But good news.
I was able to modify a DPDT On/Off/On into a DPST On/On switch.
Sending to client to test.

 

[Alan_Vander]

not sure if this will help or not
Part Search | carlingtech.com

Sent from my moto z3 using Tapatalk

 

[Hondasxs]

not sure if this will help or not
Part Search | carlingtech.com

Sent from my moto z3 using Tapatalk

Not any more. My mod worked so I'm sending it for testing.
But that's good info. Thanks.

 

[Hondasxs]

Final product.
Record wire pin location.
Remove from housing.
Reconnect to wire in same location.
Ground the long green wire.
And done.
Switch should function complete with backlighting.

Add pics once final is tested.