P500 Gear reduction reversed

William

William

If you ain’t first, you’re last...
Lifetime Member
Aug 31, 2014
1,442
2,887
113
Flowood MS
Ownership

  1. 1000-5
If people are getting gear reductions to lower gearing ratio, couldn’t people that want a faster top end get a kit made to increase gear ratio? I know it would rob bottom end power but low is extremely low anyway... just a thought.... opinions?

FYI I don’t want it, just thinking bc I have seen a lot of people wanting it...
 
ToddACimer

ToddACimer

Pioneer 1005-2
Lifetime Member
Oct 7, 2016
3,678
15,562
113
Oshkosh, Wi
Ownership

  1. 1000-5
Slightly bigger tires would be easier and you'd have more ground clearance too. Assuming the engine can pull the taller effective gear ratio of the new tires you'd be able to go faster
 
William

William

If you ain’t first, you’re last...
Lifetime Member
Aug 31, 2014
1,442
2,887
113
Flowood MS
Ownership

  1. 1000-5
Slightly bigger tires would be easier and you'd have more ground clearance too. Assuming the engine can pull the taller effective gear ratio of the new tires you'd be able to go faster
I have bigger tires, it slowed it down...
 
HUCK

HUCK

Well-Known Member
Lifetime Member
Jun 21, 2016
1,047
2,319
113
ARIZONA
Ownership

  1. 500

  2. Talon X
Have a friend who put 30s on and increased top speed by 5mph .
 
NitroxDiver

NitroxDiver

Well-Known Member
Dec 22, 2016
488
918
93
Concord NC
Ownership

  1. 500
I have bigger tires, it slowed it down...
If your bigger tires slowed it down it means your engine doesn't have the power to turn them. Bigger tires would be almost the same thing as higher gearing. So if the tires didn't work for you gears will not work. How big are the tires?
 
William

William

If you ain’t first, you’re last...
Lifetime Member
Aug 31, 2014
1,442
2,887
113
Flowood MS
Ownership

  1. 1000-5
Well the added weight from tires is the only difference... the gear increase wouldn’t add weight... I had mudlite xtrs which measured out to 28” and were heavy... could only hit 38 on flat ground. now I have 27” zillas and can hit 42 again. Like I said, I don’t care it was just a thought for people who wanted more top end... maybe even portals with higher gears instead of lower... that wouldn’t be cost effective though...
 
  • Like
Reactions: NitroxDiver
H

hondabob

Well-Known Member
Lifetime Member
May 14, 2013
1,261
5,004
113
Prescott Valley, AZ
Ownership

  1. Other Brand

  2. 1000-3
Most 27's clear. My top speed is 46 mph with 30's but I can't use full lock and I also trimmed the frame ends a bit. You lose a bit on accel but it pulls the 30's ok in 5th gear. I recommend 27's.
 
906UP

906UP

Well-Known Member
Lifetime Member
Supporting Member
Club Contributor
Jul 6, 2017
14,275
135,414
113
da Yoop
Ownership

  1. 1000-3

  2. Talon X
I'd be happy with just a taller 5th gear, even if it wouldn't "pull" it maxed out it'd be nice to be able to cruise at 25-30mph without it sounding like it's coming apart. If I can't get this thing to quiet down it'll get traded in the spring, I've made good progress but damn.....sounds like a bucket of bolts above 25mph!
 

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

User Menu

Buy us a beer!

  • Lots of time and money has gone into making sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Beer Fund!

    Club Membership!