P700 Front tires out of lign

C

cjm

New Member
May 13, 2015
8
6
3
My front tires are outta lign. Any advice on how to relign them with out having to take it to the shop ??? Thanks
 
joeymt33

joeymt33

i4WD=imitated 4WD
Moderator
Lifetime Member
Supporting Member
Club Contributor
Mar 17, 2015
11,096
39,129
113
Guntersville, AL
Ownership

  1. 1000-3

  2. 1000-5
Has it always been that way? Or did it recently happen?

I ask because the 700 can have a problem with suspension components coming loose from the frame.

This was after hitting a tree. (I know, my fault. Not Hondas).
Db0df2eab634fc9bea3a0c786e848113

This is a weld repair at the group ride in AL last fall.
2977e2093f13f83314809fc097d9fa82

Here is what happened to another member at the same event. These are A-arm brackets, so they can definitely affect alignment.
65fa5a8efc4613ec80e0f31b1d6ae754


If all is well and you just need an alignment, I guess we can help with that too.
 
C

cjm

New Member
May 13, 2015
8
6
3
It just started. I bent my lower A arm. So I replaced it but it stills pulls the the left when I drive it
 
joeymt33

joeymt33

i4WD=imitated 4WD
Moderator
Lifetime Member
Supporting Member
Club Contributor
Mar 17, 2015
11,096
39,129
113
Guntersville, AL
Ownership

  1. 1000-3

  2. 1000-5
It's not science, more like redneck but I used two yard sticks and adjusted it until it was the same front and rear.

Dcdc1110c4142fa97b96141c827c124b

I know some people say that you should have a slight toe out. That's true, and should be followed for automobiles. I didn't worry about it because this is a off-road vehicle. I did not have any trouble.