P1000 Front Light Bar Mounting location

[bowhunt716]

I have a 26in light bar thinking about centering it on the factory roof. Has anyone tried this before? Only concern I have is would it bounce? Wanting to put it several inches up the roof but below the roof line.

 

[Admin]

 

[Isaiah]

on the roof or the cage?

 

[Smitty335]

on the roof or the cage?

Was told by an ole off roader, rock crawling, low mount, high speed, upper mount/roof . I went the middle, top of the bumper. Roof mount here would last like a fart in a whirl wind! HA!

 

[Isaiah]

I think i lost you,so were did you mount it?

 

[ProudDadOf5]

I have a 24” on my bumper and I used these brackets & put in vise & bent to an angle that would work..

2X 1.25" 32mm Bull Bar Roll Cage Mount Bracket Tube Clamps LED Light Bar Holder | eBay

 

[Isaiah]

Nice

 

[bowhunt716]

Decided to go a different route 52 in curved light bar on the way. Going to mount it by windshield above hood. Thank you for all the suggestions. Decided mounting one on roof wasn't the best idea since all of our riding is trails.

 

[ProudDadOf5]

Decided to go a different route 52 in curved light bar on the way. Going to mount it by windshield above hood. Thank you for all the suggestions. Decided mounting one on roof wasn't the best idea since all of our riding is trails.

That’s what I went with and it works out great!!

 

[Smitty335]

I think i lost you,so were did you mount it?

Made a additional loop out of 1 inch BLK steel pipe and welded it to the bumper and mounted light above radiator inflow, knowing I was going to CO.And I'm short and didn't want to have to look over the light.

 

[ProudDadOf5]

@Smitty335, you ever thought of mass production? I see a definite profit for you!

 

[Smitty335]

@Smitty335, you ever thought or mass production? I see a definite profit for you!

Not really, I just know with the trails I ride what will be less maintenance. The flip out windshield, the jury is still out?

 

[JenElio]

Made a additional loop out of 1 inch BLK steel pipe and welded it to the bumper and mounted light above radiator inflow, knowing I was going to CO.And I'm short and didn't want to have to look over the light.View attachment 174372 View attachment 174373 View attachment 174373

That looks great! Nice job

 

[TripleB]

Made a additional loop out of 1 inch BLK steel pipe and welded it to the bumper and mounted light above radiator inflow, knowing I was going to CO.And I'm short and didn't want to have to look over the light.View attachment 174372 View attachment 174373 View attachment 174373

I will give u a 100 bucks for that piece of s*** windshield.

 

[Isaiah]

Made a additional loop out of 1 inch BLK steel pipe and welded it to the bumper and mounted light above radiator inflow, knowing I was going to CO.And I'm short and didn't want to have to look over the light.View attachment 174372 View attachment 174373 View attachment 174373

Looks great!

 

[Palmer]

I have a 26in light bar thinking about centering it on the factory roof. Has anyone tried this before? Only concern I have is would it bounce? Wanting to put it several inches up the roof but below the roof line.

I put an 18 inch one in front of the windshield in the black cut out area behind the hood. That way you're not looking through the light beam and it's high enough to clear a plow and to light the road or trail worked very well also easier on the wiring already being in the hood area

 

[aauman88]

54” straight for me with PBR brackets.

 

[samjaxfl]

What windshield do you have that works with that low light bar? Thanks Steve

 

[Palmer]

I put an 18 inch one in front of the windshield in the black cut out area behind the hood. That way you're not looking through the light beam and it's high enough to clear a plow and to light the road or trail worked very well also easier on the wiring already being in the hood area

I put an 18 inch one in front of the windshield in the black cut out area behind the hood. That way you're not looking through the light beam and it's high enough to clear a plow and to light the road or trail worked very well also easier on the wiring already being in the hood area

What windshield do you have that works with that low light bar? Thanks Steve

Honda OEM scratch resistant hinged from Honda parts catalog

 

[aauman88]

Mine is SATV fold up windshield

 

[Isaiah]

54” straight for me with PBR brackets.

View attachment 175749 View attachment 175750 View attachment 175751

Thats what I did It work great for me