![Tom_C](/data/avatars/m/42/42463.jpg?1626573099)
Hi All. New 500 owner. I wanted a 520 but there are none and the eta for anything is months off. I found a 2015 500 with 1500 miles and 250 hours, with winch, plow, hard top, wind shield, storage bags and a rear 2" receiver adapter for $8000, so I snapped it up.
It's in decent shape and runs fine. After looking at it after the purchase I see that the pervious owner took a lot of shortcuts mounting stuff. He cut the original bumper open to make room for the winch and did a home brew winch mount, and left some bolts loose, etc.
In short, not to my standards. I want to add the full front bumper and a solid winch mount.
Is it possible to get the full frontal bumper to replace the original bumper and a winch mount that will fit without modification? The winch is needed for the plow, which is a Warn 54" with the provantage front mount which is intact without damage or modification.
It's in decent shape and runs fine. After looking at it after the purchase I see that the pervious owner took a lot of shortcuts mounting stuff. He cut the original bumper open to make room for the winch and did a home brew winch mount, and left some bolts loose, etc.
In short, not to my standards. I want to add the full front bumper and a solid winch mount.
Is it possible to get the full frontal bumper to replace the original bumper and a winch mount that will fit without modification? The winch is needed for the plow, which is a Warn 54" with the provantage front mount which is intact without damage or modification.