P1000 Four point harness

[knuckledeep]

Does anyone have a hook up or know of a good place to get 4 point harness. Looking for 2 for sure

 

[Admin]

 

[JACKAL]

Does anyone have a hook up or know of a good place to get 4 point harness. Looking for 2 for sure

BEARD automotive latch 4 point harnesss, the version for RZR800 works perfect for all the Pioneers. Here is my install on P500.
P500 - Jackal's P500

Here is my P1K install link to buy them is in that post from RMATV.com.


P1000 - Jackal's P1000-5

 

[GlockMeister]

Does anyone have a hook up or know of a good place to get 4 point harness. Looking for 2 for sure

These are the ones I used that @Delton recommended to me. They are a little bit cheaper than the beards but still very good harnesses. I used @JACKAL install for mine..works good.
https://www.amazon.com/gp/aw/d/B01FN65NQQ/?tag=sxsweb24-20

 

[Delton]

These are the ones I used. They are a little bit cheaper than the beards but still very good harnesses. I used @JACKAL install for mine..works good.
Amazon.com: 4 Point Padded Harness with 2 Inch Pads E4 Certified: Automotive

Same ones I have. Good price, secure buckles, and pad is very comfortable.

 

[joeymt33]

Does anyone have a hook up or know of a good place to get 4 point harness. Looking for 2 for sure

DragonFire EVO. Super comfortable and quick and easy to get in and out.

I'm sure beards are also very good.

 

[nbomar]

I have the beard that @JACKAL referenced. Very comfortable. I usually shrug the shoulders off until something I do that’s stupid...


Sent from my iPhone using Tapatalk

 

[JTW]

I bought some but didn't care for them... I prefer the stock 3 point with a clip on the lap belt.

 

[elkguide]

I bought some but didn't care for them... I prefer the stock 3 point with a clip on the lap belt.

Couldn't see your toes with the 4 point?

 

[ToddACimer]

Dragonfire Evo harness with a modified Dragonfire harness bar

 

[JTW]

Dragonfire Evo harness with a modified Dragonfire harness bar

View attachment 62581

Thats gunna leave a mark or you’re gunna knock yourself out!!

 

[ToddACimer]

You’re gunna knock yourself out!!

I personally have never used the headrests and I also don't ride without a helmet. I think having the harness at the right height is more advantageous than getting tugged downward all the time. If need be I can move the upper headrest forward but i doubt it will be necessary

 

[JTW]

I personally have never used the headrests and I also don't ride without a helmet. I think having the harness at the right height is more advantageous than getting tugged downward all the time. If need be I can move the upper headrest forward but i doubt it will be necessary

View attachment 62584

Yeah.. it’s not so bad there.. it looked like it was right where your head would make contact with the pad. We never wear helmets but I do like having that bar between the headrests to hang stuff from. That will be handy.

 

[ToddACimer]

Yeah.. it’s not so bad there.. it looked like it was right where your head would make contact with the pad. We never wear helmets but I do like having that bar between the headrests to hang stuff from. That will be handy.

I'm pretty confident it's in the right place. I know lower is more convenient but it's not more comfortable for the harness. Further back would use more of the harness strap but it makes dumping the bed an issue. Like I said, the headrest is easy to move but it probably won't be necessary

 

[ToddACimer]

There are no seat belts for midgets in y machine but I do have 2 car seats

 

[1BadDart]

Does anyone have a hook up or know of a good place to get 4 point harness. Looking for 2 for sure

Do you know any drag racers in your area? The harnesses have to be replaced or re-certified every two years to pass NHRA tech. Most guys just buy new ones, the out of date belts can be picked up normally for $25-40 and usually are in good condition.

 

[knuckledeep]

Do you know any drag racers in your area? The harnesses have to be replaced or re-certified every two years to pass NHRA tech. Most guys just buy new ones, the out of date belts can be picked up normally for $25-40 and usually are in good condition.

I will ask around thank you

 

[BeerMonkey]

i have had both the 3" and 2" pro armor harnesses. i traded them out for a set of PRP 3.2 5 points (three inch laps and 2 inch shoulders) i really like them but my wife likes the sewn in style of the pro armors.

 

[Westtnpioneer]

I have Pro Armors, however if I had it to do again I would buy the Can Am or Polaris retracting harness. It's pricey but I like to be able to move forward.

 

[JTW]

I have Pro Armors, however if I had it to do again I would buy the Can Am or Polaris retracting harness. It's pricey but I like to be able to move forward.

What is this sorcery you speak of??

 

[GlockMeister]

What is this sorcery you speak of??

I hadnt heard of these either. Had i known i would have had one of these myself. Im sure it wouldnt be hard to make work.

Corbeau 2-Inch Retractable Harness Belts