P700 Few more mods to the old girl

[swsebek]

Finally got around to changing the front and rear gear oil.And it looked as good as the new stuff I put in.Changed the oil and found out I was missing the filter shim o-ring again.Went to Lowes and got this one and flapper wheeled it to size.It was almost perfect size only removed about .030 in.dia

 

[Admin]

 

[swsebek]

Also put on 2 sets of rock lights. Red underneath and blue up top for good interior lighting. Made whip mounts. And added 4 more rockers under shifters

 

[swsebek]

Then I had some red led headlights and added them too

 

[swsebek]

Was tired of the mud flicking around the mudd busters and through the hole in rear So Made and extension.

 

[swsebek]

Installed my Super atv windshield and drilled it to bolt my soft top on and then mounted the Seizmik strike mirrors. The mirrors are sweeet.

 

[swsebek]

Tractor supply rubber mat I cut for floor mat.

 

[swsebek]

Next will be dual battery set up and the ol 700 is done...

 

[jinx]

Looking great. I’m going to have to look into those mirrors

 

[Mudwing]

Looks great! I’m loving the light show!

 

[Tuco69]

Tractor supply rubber mat I cut for floor mat.View attachment 78401

What did you cut them with? The ones I say were heavy an about 3/8s if I remember right.

 

[swsebek]

What did you cut them with? The ones I say were heavy an about 3/8s if I remember right.

It took a little finesse.I had a piece of cardboard and I made a pattern, then I flipped the mat and pattern upside down and sprayed white painted on the edges. I then laid it down and cut on piece of plywood.A couple of trim cuts and it laid down nice.
Just be careful and don't try to cut through at one slice.the mat was 2'x4' for 24.99
And I have enough for a second one.

 

[bigbruse]

swsebek,
looking at getting I think the same style mirrors see link please.SEIZMIK PURSUIT SIDE MIRRORS 1.75in diameter Lifetime Warranty HONDA PIONEER | eBay
are these what you have how to you like the fit on the roll bar?

 

[swsebek]

swsebek,
looking at getting I think the same style mirrors see link please.SEIZMIK PURSUIT SIDE MIRRORS 1.75in diameter Lifetime Warranty HONDA PIONEER | eBay
are these what you have how to you like the fit on the roll bar?

No mine are the strikes. But they look alike they are 65 bucks. And they are composite plastic. The pursuits are aluminum.They will fit the 1000 ROPS better. I had to shim mine. The 700 has a 1 5/8 dia.bar.
They are good quality and I'm very pleased.The sight area is nice

 

[Max718]

Ole girl looking good

 

[Tflynn]

Next will be dual battery set up and the ol 700 is done...

Done? ha good one!

 

[CumminsPusher]

Love the lighting! Real nice job on everything looks great

 

[Tuco69]

View attachment 78459 It took a little finesse.I had a piece of cardboard and I made a pattern, then I flipped the mat and pattern upside down and sprayed white painted on the edges. I then laid it down and cut on piece of plywood.A couple of trim cuts and it laid down nice.
Just be careful and don't try to cut through at one slice.the mat was 2'x4' for 24.99
And I have enough for a second one.

White paint on edges?

 

[swsebek]

White paint on edges?

You could use a sharpie marker too. The paint makes an outline of the cardboard so you have a outline to cut.

 

[bigbruse]

No mine are the strikes. But they look alike they are 65 bucks. And they are composite plastic. The pursuits are aluminum.They will fit the 1000 ROPS better. I had to shim mine. The 700 has a 1 5/8 dia.bar.
They are good quality and I'm very pleased.The sight area is nice

View attachment 78497 View attachment 78498

gotcha thanks