P1000 Engine randomly going dead now will not start

[Mike j]

I changed the head gasket on my 2017 1005. After a year with the trying to get some one to work on it with out taking to the Honda shop. Was told nothing was wrong with the gasket. But in the end it was. So back to my issue at hand. After I put the machine back together I ran it around the house over about 3 days. Not over 4 miles or so at a time. It ran great not running hot or anything then it started to randomly going dead it could be part or moving when it happened. Now it will not start. I believe it is the injector wires but not sure. Looking for some in slight. The engine light has one long and 3 quick flashes.
Thanks.

 

[Admin]

 

[TxDoc]

Welcome from Texas

Sent from my motorola edge plus 2023 using Tapatalk

 

[Mopower58]

Welcome from Mississippi. I think a code 13 in an injector harness fault. Someone that knows a lot more than me will come along.
#NTC

 

[Mike j]

That’s what I thought I ordered some new ones waiting on them to come in.

 

[Mopower58]

That’s what I thought I ordered some new ones waiting on them to come in.

Oh yea, I’m in Crystal Springs, Ms.

 

[Remington]

I changed the head gasket on my 2017 1005. After a year with the trying to get some one to work on it with out taking to the Honda shop. Was told nothing was wrong with the gasket. But in the end it was. So back to my issue at hand. After I put the machine back together I ran it around the house over about 3 days. Not over 4 miles or so at a time. It ran great not running hot or anything then it started to randomly going dead it could be part or moving when it happened. Now it will not start. I believe it is the injector wires but not sure. Looking for some in slight. The engine light has one long and 3 quick flashes.
Thanks.

Yes u need an Injector harness.
Welcome from Michigan!
Got any pics if the rig? POIDH
First owner? Miles? Why did you have to change the head gasket?
Your leaving us hanging here like Epstine! 😂

 

[0860silverado]

Code 13 is number two (rear) injector not firing. It's a relatively common issue and an easy fix with the kit that is sold on this forum.

 

[Mike j]

Code 13 is number two (rear) injector not firing. It's a relatively common issue and an easy fix with the kit that is sold on this forum.

That the ones I ordered. I took my test light and confirmed it was the back one bad. But I am going to replace both while I am in there.

 

[TxDoc]

Is this the kit that's needed?

Amazon.com

Sent from my motorola edge plus 2023 using Tapatalk

 

[Neohio]

Is this the kit that's needed?

Amazon.com

Sent from my motorola edge plus 2023 using Tapatalk

Yes, that is the kit, and is from richard.

 

[TxDoc]

Yes, that is the kit, and is from richard.

Thank you. Just making sure. Possibly a good preemptive purchase to have ready. Like insurance.

Sent from my motorola edge plus 2023 using Tapatalk

 

[Rayger143]

Thank you. Just making sure. Possibly a good preemptive purchase to have ready. Like insurance.

Sent from my motorola edge plus 2023 using Tapatalk

I carry 2 with me.

 

[TxDoc]

I carry 2 with me.

Sent from my motorola edge plus 2023 using Tapatalk

 

[someguy1313]

good stuff here.

 

[TripleB]

I carry 2 with me.

Me too. Even though I already changed both out on the trail 3 years ago.

 

[Mike j]

Update installed the new injector harness. Good to go. On that part. But it about time for clutch replacement has any one use an after market clutch.

 

[Red500]

Welcome to the club from East Tennessee.

 

[DRZRon1]

Update installed the new injector harness. Good to go. On that part. But it about time for clutch replacement has any one use an after market clutch.

does anyone make an aftermarket clutch?

I need to be educated…..