Here are some pics of my electrical and electronics I finally completed...
I designed and fabricated the switch panel by hand. The push button switches on each side of the volt meter are Pilot and Co-Pilot PTT switches for the 2-way radio.
I located the FlightCom aviation intercom in the glove box because it is not waterproof.
The VHF/UHF 2-way radio is waterproof, mounted under dash centered under the steering wheel.
I made the brackets for the fuse block. It is turned on/off via the relay to the lower right of the fuse box with a master switch. I mounted the horn (bottom right) from my Honda ST1300.
I designed and fabricated the switch panel by hand. The push button switches on each side of the volt meter are Pilot and Co-Pilot PTT switches for the 2-way radio.
I located the FlightCom aviation intercom in the glove box because it is not waterproof.
The VHF/UHF 2-way radio is waterproof, mounted under dash centered under the steering wheel.
I made the brackets for the fuse block. It is turned on/off via the relay to the lower right of the fuse box with a master switch. I mounted the horn (bottom right) from my Honda ST1300.
