Multi EASY DOOR RATTLE FIX FOR PIONEERS

[Pilot2016]

I bought some 3/4” x 1” waterproof sealing adhesive weather strip.

I have only done the front doors so far on my 700-4 as pics below.
It works great.
SOLID NO RATTLE DOORS NOW.

They are firm to close but feel like quality car doors🤣🤣

I backed up the self adhesive with some spray 3M glue.

I also

 

[Admin]

 

[Baldeagle]

I bought some 3/4” x 1” waterproof sealing adhesive weather strip.

I have only did front door on my 700-4 as pics below.

It works great.
SOLID NO RATTLE DOORS NOW.

I backed up the self adhesive with some spray 3M glue.
View attachment 199293


I alsoView attachment 199297View attachment 199298View attachment 199299

Or you could just adjust the rubber bumper by the latch


Sent from my iPad using Tapatalk

 

[Russ989]

Or you could just adjust the rubber bumper by the latch


Sent from my iPad using Tapatalk

That’s true but sometimes that thing doesn’t adjust far enough.

 

[Pilot2016]

Or you could just adjust the rubber bumper by the latch


Sent from my iPad using Tapatalk

THANK YOU
Been there done that....
They need to be longer and firmer??
Wonder if after market has them????

 

[SteveinUT]

THANK YOU
Been there done that....
They need to be longer and firmer??
Wonder if after market has them????

Yeah, my bumpers/snubbers aren't long enough. The doors still rattle.

 

[rickoshea]

Yeah, my bumpers/snubbers aren't long enough. The doors still rattle.

go get a pack of those 3m foam rubber stick ons that you put on the bottom of chairs/table legs to prevent floor scratches and stick them on where the door snubbers hit the body.i did mine and they work great.zero door rattles.

 

[SteveinUT]

go get a pack of those 3m foam rubber stick ons that you put on the bottom of chairs/table legs to prevent floor scratches and stick them on where the door snubbers hit the body.i did mine and they work great.zero door rattles.

Yeah, I saw your post about them. That is my next step. Thanks for the suggestion!

 

[MikeyXX]

Pilot, how is it holding up? Is water or mud or watever breaking down the seal? I'm going to do this in the fall to reduce the snow and wind blowing in.

 

[SteveinUT]

go get a pack of those 3m foam rubber stick ons that you put on the bottom of chairs/table legs to prevent floor scratches and stick them on where the door snubbers hit the body.i did mine and they work great.zero door rattles.

Worked like a charm, Rick! Now I need to take care of the bed rattles!

 

[JenElio]

Worked like a charm, Rick! Now I need to take care of the bed rattles!

Check out @Russ989 trifecta build, he's got some kool hacks.

 

[BigOL3]

THANK YOU
Been there done that....
They need to be longer and firmer??
Wonder if after market has them????

1/4" thick piece of dense foam glued to the frame for the the adjustable bumper to strike, took care of that problem.

 

[Geeseman]

I bent out the bracket with a screwdriver then screwed rubber stops back in. Stopped rattle. Might need to adjust stopper a few times but it does work.

 

[Montecresto]

go get a pack of those 3m foam rubber stick ons that you put on the bottom of chairs/table legs to prevent floor scratches and stick them on where the door snubbers hit the body.i did mine and they work great.zero door rattles.

Yep, I have those on the Talon and both Pioneers....👍